1500-1S Bourns

Features Applications GDT/TBU High-Speed Protector technology Datacommunications Lowimpulselet-through HighlyexposedEthernet Highsurgecurrentrating 1000Base-TGigabitEthernet Availableinisolatedandgroundedversions Indoor/controlledenvironmentinstallations 10/100/1000datacompatibility Telecommunicationsandindustrial installations 5kVisolation Listed per UL 497B (File: E153537) 1500 Series Gigabit Ethernet SPD The 1500 Series Ethernet Surge Protective Device (SPD) incorporates multiple Bourns circuit protection technologies. These technologies are designed to work together to provide an unmatched level of surge protection for exposed Ethernet applications. The 1500 Series is designed to meet key surge and AC power cross requirements of GR-1089-Core Issue 6. The isolated model is designed to withstand voltages up to 5 kV. The 1500 Series is available as a wall mount unit with optional DIN Rail hardware. Characteristics Test methods per UL 497B, GR-1089 Issue 6, and CSA C22.2. Parameter Isolated Version Grounded Version DC Breakdown Line to Line 150 V Typical Input / 7 V Typical Output DC Breakdown Line to Ground N/A 150 V Typ. Line Series Resistance (Loop) 12 Typ. Line Series Balance 0.5 Typ. / 1.0 Max Capacitance Line to Line 1 MHz N/A 10 pF Typ. Time-to-block (t ) <1 s block First Level Surge 1 kV 10/1000 s, 100 A >10 operations 2.5 kV 2/10 s, 500 A >10 operations 800 V 1.2/50 s, 8/20 s Combo Wave >10 operations Second Level Surge 1 2.5 kV 2/10 s, 500 A, Inductive Kick 1 operation 1 6 kV / 3 kA 1.2/50 s, 8/20 s Combo Wave 1 operation First Level Power Fault 15 minutes 220 mA Below Protection Threshold 600 V / 1 A / 1 Second > 60 operations 1000 V / 1 A / 1 Second > 60 operations 425 V / 0.5 A / 4 Seconds > 1 operation Second Level Power Fault 1 120 V / 25 A 15 minutes 1 425 V / 40 A / 1.5 Second 1 operation 1 425 V / 7 A / 5 Seconds 1 operation 1 425 V / 2.2 A 15 minutes BER Performance Testing 10/100 Mbps > 100 meters 1 Gbps Up to 100 meters Storage and Operating Temperature -40 to +65 C Ground Connection Screw Lug or DIN Rail Clip Notes: Isolated version does not require a ground connection. 1) Fuse may fail open and disconnect from circuit. WARNING Specications are subject to change without notice. Users should verify actual device performance in their specic Cancer and Reproductive Harm applications. The products described herein and this document are subject to specic legal disclaimers as set forth on the www.P65Warnings.ca.gov last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.1500 Series Gigabit Ethernet SPD Product Dimensions 65.10 25.12 15.75 (2.56) (0.99) (0.62) WITHOUT DIN RAIL LINE SIDE 46.48 107.0 (1.83) (4.21) PROTECTED 40.64 MM (1.60) DIMENSIONS: (INCHES) How To Order 1500 - X Y - W Model Number Designator Configuration 1 = Isolated* 2 = Grounded Hardware Options S = Screw Lug D = DIN Rail Ground Wire (Optional) W = 14 AWG Ground Wire, 3 Ft. * Isolated unit requires no ground. Asia-Pacific: Tel: +886-2 2562-4117 Email: asiacus bourns.com EMEA: Tel: +36 88 885 877 Email: eurocus bourns.com The Americas: Tel: +1-951 781-5500 Email: americus bourns.com www.bourns.com REV. D 10/19 Bourns is a registered trademark of Bourns, Inc. in the United States and other countries. TBU is a registered trademark of Bourns, Inc. in the U.S. and other countries, except Japan. All references to TBU in this document for use in Japan shall be deemed to be replaced with Bourns TBU. Specications are subject to change without notice. Users should verify actual device performance in their specic applications. The products described herein and this document are subject to specic legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.