Features RoHS compliant* Bushing mount Optional AR pin feature Plastic or metal shaft and bushings Wirewound Solder lugs or PC pins Sealable (Full body seal) Designed for use in HMI applications 3590 - Precision Potentiometer 1 Electrical Characteristics Standard Resistance Range........................................................................................................................................................................ 200 to 100 K ohms Total Resistance Tolerance ................................................................................................................................................................................................ 5 % Independent Linearity ................................................................................................................................................................................................... 0.25 % Effective Electrical Angle ................................................................................................................................................................................3600 +10 , -0 Absolute Minimum Resistance ......................................................................................................................1 ohm or 0.1 % maximum (whichever is greater) Noise ................................................................................................................................................................................................ 100 ohms ENR maximum Dielectric Withstanding Voltage (MIL-STD-202, Method 301) Sea Level ...............................................................................................................................................................................................1,500 VAC minimum Power Rating (Voltage Limited By Power Dissipation or 450 VAC, Whichever is Less) +40 C .........................................................................................................................................................................................................................2 watts +125 C .........................................................................................................................................................................................................................0 watt Insulation Resistance (500 VDC) .....................................................................................................................................................1,000 megohms minimum Resolution..............................................................................................................................................................................See recommended part numbers 1 Environmental Characteristics Operating Temperature Range ......................................................................................................................................................................-40 C to +125 C Storage Temperature Range .........................................................................................................................................................................-55 C to +125 C 2 Temperature Coef cient Over Storage Temperature Range .........................................................................................................50 ppm/C maximum/unit Vibration .............................................................................................................................................................................................................................15 G Wiper Bounce ................................................................................................................................................................................0.1 millisecond maximum Shock..................................................................................................................................................................................................................................50 G Wiper Bounce ................................................................................................................................................................................0.1 millisecond maximum Load Life ....................................................................................................................................................................................................1,000 hours, 2 watts Total Resistance Shift ....................................................................................................................................................................................2 % maximum Rotational Life (No Load)................................................................................................................................................................ 1,000,000 shaft revolutions Total Resistance Shift ....................................................................................................................................................................................5 % maximum Moisture Resistance (MIL-STD-202, Method 103, Condition B) Total Resistance Shift ....................................................................................................................................................................................2 % maximum IP Rating Sealed Versions (-3, -4, -7, and -8) ...............................................................................................................................................................................IP 65 Unsealed Versions (-1 -2, -5, and -6) ............................................................................................................................................................................IP 40 1 Mechanical Characteristics Stop Strength..............................................................................................................................................................................45 N-cm (64 oz.-in.) minimum Mechanical Angle ...........................................................................................................................................................................................3600 +10 , -0 Torque (Starting & Running) ................................................................................................................................0.35 N-cm (0.5 oz.-in.) maximum (unsealed) 1.1 N-cm (1.5 oz.-in.) maximum (sealed) Mounting ..............................................................................................................................................................................55-80 N-cm (5-7 lb.-in.) (plastic) 90-113 N-cm (8-10 in.-lb.) (metal) Shaft Runout......................................................................................................................................................................................0.13 mm (0.005 in.) T.I.R. Lateral Runout ...................................................................................................................................................................................0.20 mm (0.008 in.) T.I.R. Shaft End Play ...................................................................................................................................................................................0.25 mm (0.010 in.) T.I.R. Shaft Radial Play ...............................................................................................................................................................................0.13 mm (0.005 in.) T.I.R. Pilot Diameter Runout .......................................................................................................................................................................0.08 mm (0.003 in.) T.I.R. Backlash ............................................................................................................................................................................................................ 1.0 maximum Weight ........................................................................................................................................................................................................Approximately 19 G Terminals ................................................................................................................................................................................................Solder lugs or PC pins Soldering Condition Manual Soldering...........................................................96.5Sn/3.0Ag/0.5Cu solid wire or no-clean rosin cored wire 370 C (700 F) max. for 3 seconds Wave Soldering ...................................................................................96.5Sn/3.0Ag/0.5Cu solder with no-clean ux 260 C (500 F) max. for 5 seconds Wash processes .......................................................................................................................................................................................Not recommended Marking .....................................Manufacturers name and part number, resistance value and tolerance, linearity tolerance, wiring diagram, and date code. Ganging (Multiple Section Potentiometers) ......................................................................................................................................................1 cup maximum Hardware ............................................................................................................ One lockwasher and one mounting nut is shipped with each potentiometer. NOTE: For Anti-rotation pin add 91 after con guration dash number. Example: -2 becomes -291 to add AR pin. 1 At room ambient: +25 C nominal and 50 % relative humidity nominal, except as noted. 2 Consult manufacturer for complete speci cation details for resistances below 1k ohms. Recommended Part Numbers BOLDFACE LISTINGS ARE IN STOCK AND READILY AVAILABLE (Printed Circuit) (Solder Lug) (Solder Lug) Resistance () Resolution (%) THROUGH DISTRIBUTION. FOR OTHER OPTIONS CONSULT FACTORY. 3590P-2-102L 3590S-2-102L 3590S-1-102L 1,000 .029 ROHS IDENTIFIER: 3590P-2-202L 3590S-2-202L 3590S-1-202L 2,000 .023 L = COMPLIANT 3590S-2-502L 5,000 .025 3590P-2-502L 3590S-1-502L 3590P-2-103L 3590S-2-103L 3590S-1-103L 10,000 .020 3590P-2-203L 3590S-2-203L 3590S-1-203L 20,000 .019 Speci cations are subject to change without notice. 3590P-2-503L 3590S-2-503L 3590S-1-503L 50,000 .013 The device characteristics and parameters in this data sheet 3590P-2-104L 3590S-2-104L 3590S-1-104L 100,000 .009 can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their speci c applications. *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. *RoHS COMPLIANT 3590 - Precision Potentiometer Product Dimensions -1, -3, -5, -7 Con gurations -2, -4, -6, -8 Con gurations 5.08 .38 5.08 .38 (.200 .015) (.200 .015) 6.99 .38 5.08 .38 6.99 .38 (.275 .015) (.200 .015) (.275 .015) 5.08 .38 10.31 +.00/-.10 10.31 + .00/- .13 (.200 .015) (.406 +.000/-.004) (.406+.000/-.005) *SEE 3 3 .76 .25 1 NOTE BUSHING DIAMETER 1 R *SEE (SEE PART NUMBERS) .030 .010 2 2 NOTE .81 .81 (.032) (.032) SHAFT DIAMETER SHAFT DIA. (SEE .25 (SEE PART NUMBERS) .25 PART NUMBERS) (.010) (.010) 1.19 BUSHING DIA. (SEE PART NUMBERS) (.047) 7.92 *BUSHING THREAD SPECIFICATIONS: .81 .25 -1, -2, -3, -4 .... 3/8-32 UNF (.312) 7.93 (.032 .010) -5, -6, -7, -8 .... M9 x 0.75-7H 18.6 .4 20.62 .81 (.312) (.732 .015) (.812 .032) 18.59 .38 20.63 .81 (.732 .015) (.812 .032) 12.2 15.54 12.2 (.48) 15.54 (.612) (.480) R MAX. (.612) R MAX. 11.81 11.81 (.465) (.465) 22.22 .38 12.70 12.70 0.25 DIA. DIA. DIA. DIA. (.500) (.875 .015) (.500 .010) 22.22 .38 MOUNTING SURFACE MOUNTING SURFACE (.875 .015) Recommended PCB Layout Terminal Styles HOLE DIAMETER P Terminal Style FMS 2.08 PC PIN 12.19 0.51 TERMINAL (.082) (.480 .020) THICKNESS 1.63 0.38 .305 .003 (.064 .015) (.012 .0001) 5.08 5.08 6.99 (.275) (.200) (.200) 3.30 0.38 (.130 .015) Schematic CCW CW 213 S Terminal Style 12.19 0.51 CW (.480 .020) 2.54 (.100) 3 PLCS. SOLDER LUG TOLERANCES: EXCEPT WHERE NOTED TERMINAL .508 .127 DECIMALS: .XX .XXX 0.86 (.02), (.005) (.034) FRACTIONS: 1/64 MM 3 PLCS. DIMENSIONS: (IN.) Speci cations are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their speci c applications.