Features n Recommended for rosin flux and solvent n RoHS compliant* clean or no clean flux processes n High profile offers increased power n Marking on contrasting background for handling permanent identification n Wide assortment of pin packages enhances design flexibility n Ammo-pak packaging available 4600H Series - Thick Film Conformal SIPs 4600H PACKAGE POWER TEMPERATURE Product Characteristics Package Power Temp. Derating Curve Product Dimensions DERATING CURVE Resistance Range 8.89 A MAX. (.350) .................... 10 ohms to 10 megohms MAXIMUM Maximum Operating Voltage .........100 V 3.50 Temperature Coefficient of Resistance 50 to 2.2 megohms .....100 ppm/C 3.00 4614H below 50 .....................250 ppm/C PIN 1 REF. above 2.2 megohms.......250 ppm/C 4612H 2.50 1.24 MAX. TCR Tracking.........................50 ppm/C 3.3 +0.5/-0.3 BOTH ENDS(.049) 4610H maximum equal values (.130 +.020/ -.012) 2.00 0.50 0.10 TYP. Resistor Tolerance ............... See circuits (.020 .004) 4608H Insulation Resistance 2.54 .07 1.50 ................ 10,000 megohms minimum (.100 .003*) 4606H TYP. Dielectric Withstanding Voltage 1.00 NON-ACCUM. Pin A Maximum 4604H ...........................................200 VRMS Count mm (Inches) Operating Temperature 4 10.11 (.398) .50 5 12.65 (.498) 2.49 ................................-55 C to +125 C MAX. 6 15.19 (.598) (.098) 7 17.73 (.698) 8 20.27 (.798) Environmental Characteristics 0725 0 125 9 22.81 (.898) 10 25.35 (.998) TESTS PER MIL-STD-202 ...... R MAX. AMBIENT TEMPERATURE ( C ) 11 27.89 (1.098) Short Time Overload..................0.25 % 12 30.43 (1.198) 13 32.97 (1.298) Load Life ....................................1.00 % .254 .050 TYP. 14 35.51 (1.398) Package Power Ratings (Watts) Moisture Resistance ..................0.50 % (.010 .002) Resistance to Soldering Heat Ambient Ambient ...............................................0.50 % Temp. Temp. Maximum package length is equal to 2.54mm (.100 ) times the Terminal Strength ......................0.25 % Pkg. 70 C Pkg. 70 C number of pins, less .005mm (.002 ). Thermal Shock ..........................0.25 % 4604H 0.80 4610H 2.00 Governing dimensions are in metric. Dimensions in parentheses 4605H 1.00 4611H 2.20 are inches and are approximate. Physical Characteristics 4606H 1.20 4612H 2.40 *Terminal centerline to centerline measurements made at point of Flammability ........ Conforms to UL94V-0 4607H 1.40 4613H 2.60 emergence of the lead from the body. Body Material....................... Epoxy resin 4608H 1.60 4614H 2.80 Standard Packaging 4609H 1.80 .................. Bulk, Ammo-pak available For Standard Values Used in Capacitors, Inductors, and Resistors, How To Order Typical Part Marking click here. Represents total content. Layout may 46 06 H - 101 - 222 LF vary. Model (46 = Conformal Part Number Part Number SIP) 4606H-101-RC 6H-1-RC Number of Pins 4608H-102-RC 8H-2-RC Physical Configuration (H = Thick Film High Profile) 4610H-104-RC/RC 10H-4-RC/RC Electrical Configuration 101 = Bussed RC = ohmic value, 3-digit resistance 102 = Isolated code. 104 = Dual Terminator CIRCUIT AP1 = Bussed Ammo** NUMBER OF PINS AP2 = Isolated Ammo** RESISTANCE 6H-2-222 AP4 = Dual Ammo** YYWW CODE Resistance Code DATE CODE PIN ONE First 2 digits are significant INDICATOR Third digit represents the MANUFACTURER S TRADEMARK number of zeros to follow. Resistance Tolerance Blank = 2 % (see Resistance Tolerance on next page for resistance range) F = 1 % (100 ohms - 5 megohms) Terminations All electrical configurations EXCEPT 104 & AP4: LF = Sn/Ag/Cu-plated (RoHS compliant) WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov ONLY electrical configurations 104 & AP4: *RoHS Directive 2015/863, Mar 31, 2015 and Annex. L = Sn/Ag/Cu-plated (RoHS compliant) Specifications are subject to change without notice. Consult factory for other available options. Users should verify actual device performance in their specific applications. **Available for packages with 10 pins or less. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. WATTSFor information on specific applications, download Bourns application notes: n DRAM Applications n Dual Terminator Resistor Networks n R/2R Ladder Networks n SCSI Applications 4600H Series - Thick Film Conformal SIPs Isolated Resistors (102 Circuit) Bussed Resistors (101 Circuit) Dual Terminator (104 Circuit) Model 4600H-102 Model 4600H-101-RC Model 4600H-104-R1/R2 4, 6, 8, 10, 12 or 14 Pin 4 through 14 Pin 4 through 14 Pin ISOLATED RESISTORS BUSSED RESISTORS 101 CIRCUIT DUAL TERMINATOR 104 CIRCUIT 102 CIRCUIT ... R2 R2 R2 R2 R2 R2 1 46 12 14 1 14 R1 R1 R1 R1 R1 R1 1 8 These models incorporate 3 to 13 These models incorporate 2 to 7 The 4608H-104 (shown above) is an 8- thick-film resistors of equal value, each isolated thick-film resistors of equal pin configuration and terminates 6 lines. value, each connected between two connected between a common bus Pins 1 and 8 are common for ground (pin 1) and a separate pin. pins. and power, respectively. Twelve thick- film resistors are paired in series be - Resistance Tolerance Resistance Tolerance tween the common lines (pins 1 and 8). 10 ohms to 49 ohms ...................1 ohm 10 ohms to 49 ohms ...................1 ohm Resistance Tolerance 50 ohms to 5 megohms ................ 2 %* 50 ohms to 5 megohms ................ 2 %* Above 5 megohms..........................5 % Above 5 megohms..........................5 % Below 100 ohms ....................... 2 ohms 100 ohms to 5 megohms .............. 2 %* Power Rating per Resistor Power Rating per Resistor Above 5 megohms..........................5 % At 70 C .................................. 0.30 watt At 70 C .................................. 0.50 watt Power Rating per Resistor Power Temperature Derating Curve Power Temperature Derating Curve At 70 C .................................. 0.30 watt .70 .70 Power Temperature Derating Curve .60 .60 .70 .50 .50 .60 .40 .40 .50 .30 .30 .40 .20 .20 .30 .10 .10 .20 0725 0 125 0725 0 125 .10 AMBIENT TEMPERATURE ( C ) AMBIENT TEMPERATURE ( C ) 0725 0 125 Popular Resistance Values (101, 102 Circuits)** AMBIENT TEMPERATURE ( C ) Ohms Code Ohms Code Ohms Code Ohms Code Ohms Code Popular Resistance Values (104 Circuit)** 10 100 180 181 1,800 182 15,000 153 120,000 124 22 220 220 221 2,000 202 18,000 183 150,000 154 Resistance 27 270 270 271 2,200 222 20,000 203 180,000 184 Ohms Code 33 330 330 331 2,700 272 22,000 223 220,000 224 R R R R 1 2 1 2 39 390 390 391 3,300 332 27,000 273 270,000 274 160 240 161 241 47 470 470 471 3,900 392 33,000 333 330,000 334 180 390 181 391 56 560 560 561 4,700 472 39,000 393 390,000 394 220 270 221 271 68 680 680 681 5,600 562 47,000 473 470,000 474 220 330 221 331 82 820 820 821 6,800 682 56,000 563 560,000 564 330 390 331 391 100 101 1,000 102 8,200 822 68,000 683 680,000 684 330 470 331 471 120 121 1,200 122 10,000 103 82,000 823 820,000 824 3,000 6,200 302 622 150 151 1,500 152 12,000 123 100,000 104 1,000,000 105 * 1 % tolerance is available by adding suffix code F after the resistance code. **Non-standard values available, within resistance range. REV. 10/01/20 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. WATTS WATTS WATTS