AMS22S5A1BHAFL334 Bourns

Features n RoHS compliant* n Non-contacting magnetic technology n Highly resistant to vibration/shock n Highly resistant to fluid/dust ingress n Programmable at factory for zero position n Robust design for industrial applications n Highly repeatable AMS22S Non-Contacting Analog Rotary Position Sensor 1 Electrical Characteristics ( 25 C) Product Dimensions VDD Supply Voltage ..................................................................................................5 V 10 % 19.69 MM MAX. DIA. DIMENSIONS: 2 Supply Current (.775) (INCHES) For Low Speed Processing (Code L) ................................................................... 10 mA max. 19.05 +.000/-.025 (.750 +.000/-.001) For High Speed Processing (Code H) ................................................................. 20 mA max. 3.167 +.000/-.025 Output Signal (Single) ..................................................................................................... Analog DIA. (.1247 +.000/-.001) Independent Linearity ...................................................................................................... 0.5 % 1.57 0.10 (0.3 % available on request) (.062 .004) Hysteresis .........................................................................................................0.2 % VDD max. 1.57 0.10 3 (.062 .004) Effective Electrical Angle ..................................................................................................340 1.57 0.10 Programmable Electrical Angle .................................................. 10 to 360 (10 increments) (.062 .004) Voltage Output (Programmable) ................................................................ 1 to 99 % VDD 1 % Output Resolution .................................................................................................12 bit 360 19.69 Load Resistance Recommended .......................................................................10K ohms to (.775) Overvoltage Protection .................................................................................................+20 VDC MAX. DIA. 22.23 Reverse Voltage Protection ...........................................................................................-10 VDC (.875) DIA. Environmental Characteristics 12.7 0.76 15.62 0.51 Operating Temperature ......................................................................................-40 to +125 C 3 PLCS. (.500 .030) (.615) (.020) Moisture Resistance .........................................................................MIL-STD-202, Method 106 4.06 0.38 Insulation Resistance 500 VAC..........................................................................500 MW min. 2.67 +.000/-.076 DIA. (.160 .015) (.105 +.000/-.003) Rotational Life (Shaft Revolutions) .............................................................................. 50 million 3 PLCS. 3.18 +.000/-.025 Vibration ..............................................................................................................................15 G DIA. (.125 +.000/-.001) Shock...................................................................................................................................50 G FLATTED IP Rating ..............................................................................................................................IP50 OPTION 7.80 MIN. ESD Rating ................................................................................................................. 2 kV max. (.307) Mechanical Characteristics ( 25 C) 2.03 (.080) Mechanical Angle ..................................................................................................... Continuous 0.51 (.020) Shaft/RPM ...........................................................................................................200 RPM max. Torque (Starting & Running) ...........................................................1.06 N-cm. (1.5 oz-in.) max. 1.55 0.25 Shaft Material ...................................................................................................... Stainless steel (.061 .010) 1.02 (.040) Terminals ................................................................. Brass / 100 % matte tin over Ni Strike (e3) 2.80 0.10 Bearing .................................................................................................................Bronze sleeve (.110 .004) Soldering Condition 45 5 Manual Soldering .................................................96.5Sn/3.0Ag/0.5Cu solid wire or no-clean rosin cored wire 370 C (700 F) max. for 3 seconds OUTPUT VOLTAGE INCREASES WHEN Fig. SHAFT IS ROTATED IN THIS DIRECTION Wave Soldering ............................................. 96.5Sn/3.0Ag/0.5Cu solder with no-clean fl ux (SEE HOW TO ORDER FOR 1 DIRECTION CODE) 260 C (500 F) max. for 5 seconds Wash processes ........................................................................................Not recommended CCW CW 1 At room ambient: +25 C nominal and 50 % relative humidity nominal, except as noted. 5.08 2 (.200) See Processing Speed in How to Order selection guide. 3 PLCS. 3 Other Effective Electrical Angles available. See How to Order selection guide. + S1 GND V+ SUPPLY Rotational Life vs. Shaft Side Load (GROUND) (INPUT) SIGNAL 60 5.08 5.08 (OUTPUT) (.200) (.200) 50 40 Schematic 30 20 + V (5 V) DD 10 S1 V OUT 0 GND 0 50 100 150 200 250 300 350 400 450 500 Shaft Side Load (grams) *RoHS Directive 2015/863, Mar 31, 2015 and Annex. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. WARNING Cancer and Reproductive Harm The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of www.P65Warnings.ca.gov this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Rotational Life (Millions of Shaft Revolutions) AMS22S Non-Contacting Analog Rotary Position Sensor How To Order AM S2 2S 5A1B LA FL 33 4 MODEL DESIGNATOR EFFECTIVE ELECTRICAL ANGLE Code Description 10 Increments AM Analog Magnetic Code Description 01 10 CONFIGURATION 02 20 Code Description 03 30 S Single-turn 34 340 35 350 SIZE 36 360 Code Description Notes: 22 22 mm Effective Electrical Angle a vailable in 10 increments from MOUNTING CONFIGURATION a minimum of 10 to 360 maximum. Code Description Use CodeB for 45. S Servo Mount, 1/2 Shaft FMS, DIRECTION* 1/8 Shaft Dia. Code Description 1 CCW (Increasing Voltage) 60 SUPPLY VOLTAGE, V CC 3 CW (Increasing Voltage) Code Description * See Figure 1 for clarification. 5 5 VDC 50 TERMINAL CONFIGURATION OUTPUT TYPE 40 12 Code Description Code Resolution Type Signal L Axial A1 Analog Single 12 Bit 10 30 SHAFT STYLE INDEPENDENT LINEARITY 8 Code Description Code Description 20 B 0.5 % F Flatted 6 R Round C 0.3 % 10 4 VOLTAGE RATIO 1 % PROCESSING SPEED 0 Code Description 2 Code Output Refresh Rate 0 50 100 150 200 250 300 350 400 450 500 A 1-99 % of VCC H High (200 s Typ.) B 5-95 % of VCC 0 L Low (600 s Typ.) Shaft Side Load (grams) 0 50 100 150 200 250 300 350 400 450 500 C 10-90 % of VCC Shaft Side Load (grams) Shaded areas represent most common features. Standard Output: 1-Turn CW Increasing (Code 334 Shown) Resolution EEA Resolution EEA Resolution EEA Resolution 100 90 10 114 130 1479 260 2958 80 VOLTAGE RATIO A 20 228 140 1593 270 3072 70 30 341 150 1707 280 3186 60 50 VOLTAGE RATIO C 40 455 160 1820 290 3300 40 45 512 170 1934 300 3413 30 50 569 180 2048 310 3527 20 10 60 683 190 2162 320 3641 0 70 796 200 2276 330 3755 0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300 320340 360 80 910 210 2389 340 3868 CW DIRECTION 90 1024 220 2503 350 3982 Mechanical Angle () 100 1138 230 2617 360 4096 110 1252 240 2731 120 1365 250 2844 REV. 06/20 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Vout (%) Rotational Life (Millions of Cycles) Rotational Life (Millions of Shaft Revolutions)