MNS2-9-W2-OC-ST Monnit

by The Leading Enterprise Internet of Things Solution Wireless Open/Closed Sensors Features of Monnit ALTA Sensors General Description Wireless range of 1,200+ feet through 12+ walls * The ALTA Wireless Open/Closed Sensor can be used to Frequency-Hopping Spread Spectrum (FHSS) detect when a door or window is opened and closed using a Improved interference immunity magnetic switch. Improved power management for longer battery life ** (12+ years on AA batteries) Detects when a door or window is accessed. Encrypt-RF Security (Diffie-Hellman Key Exchange + Uses magnetic detection switch. AES-128 CBC for sensor data messages) Datalogs 2000 to 4000 readings if gateway connection is lost (non-volatile flash, persists through the power Principle of Operation cycle): - 10-minute heartbeats = ~ 22 days The ALTA Wireless Open/Closed Sensor uses an external - 2-hour heartbeats = ~ 266 days magnetic switch to detect the presence or removal of a Over-the-air updates (future proof) trigger magnet. When the sensor detects that the magnet is Free iMonnit basic online wireless sensor monitoring removed or returned it sends the information to the iMonnit and notification system to configure sensors, view Online Sensor Monitoring and Notification System. The data data and set alerts via SMS text and email is then stored in the online system and can be reviewed and exported as a data sheet or graph. Notification alerts can Actual range may vary depending on environment. * be set up through the online system to alert the user when ** Battery life is determined by sensor reporting a magnetic source is present or not with the ability to only frequency and other variables. Other power options notify within time of day parameters. are also available. Wireless Range Comparison Example Applications Wireless Range Comparison Doors and windows. Monnit ALTA Cabinets and lockers. IT server closets. Freezer and cooler doors. And much more. Monnit Other Wireless Platforms Wifi Bluetooth PAGE11.125 in Pinch and Pull (28.575 mm) To Change Battery 2.0 in (50.8 mm) CR2032 BATTERY 0.875 in (22.225 mm) ALTA Commercial Coin Cell Wireless Open/Closed Sensor Technical Specifications Supply voltage 2.03.8 VDC * Current consumption 0.2 A (sleep mode), 0.7 A (RTC sleep), 570 A (MCU idle), 2.5 mA (MCU active), 5.5 mA (radio RX mode), 22.6 mA (radio TX mode) Operating temperature range (board circuitry and coin cell) -7C to +60C (20F to +140F) Optimal battery temperature range (coin cell) +10C to +50C (+50F to +122F) Magnetic switch SPST, gold under -plating with Deactivated Rhodium exterior outer-plating (capable of 50 million activations) Operation gap Up to 3/4 inch Wire leads 22 gauge/15 inch length Magnet Alnico magnet/Weatherproof, high-impact ABS exterior plastic covering with self-adhesive backing Magnet temperature range -15F to 160F (-25C to 70C) Datalogging Datalogs 2000 to 4000 readings if gateway connection is lost (non-volatile flash, persists through the power cycle): - 10-minute heartbeats = ~ 22 days - 2-hour heartbeats = ~ 266 days Wireless range 1,200+ ft non-line-of-sight Security Encrypt-RF (256-bit key exchange and AES-128 CTR) Weight 0.7 ounces Certifications 900 MHz product FCC ID: ZTL-G2SC1 and IC: 9794A- G2SC1. 868 and 433 MHz product tested and found to Industry comply with: EN 300 220-2 V3.1.1 (2017-02), EN 300 220-2 Canada V3.1.1 (2017-02) and EN 60950 * Circuits cannot withstand negative voltage. Please take care when installing batteries. PinchPower Enclosures CR2032 BATTERY CR2032 BATTERY + Pinch Pull Press (press in on the sides) (sensor away from base) (sensor back into base) PAGE 2