CleO50 Module Datasheet Version 1.0 Document Reference No.: FT 001342 Clearance No.: BRT 045 Future Technology Devices International Limited Datasheet CleO50 Module 1 Introduction Support landscape and portrait modes The CleO50 is a smart TFT display shield for Arduino and MikroBUS. It includes a 5.0 inch In built FTDI FT812 embedded video engine 800x480 pixel TFT LCD panel with resistive touch, (EVE) graphic controller PWM audio output with in-built speaker amplifier for Anti-aliased graphics throughout for much finer better audio quality. image quality with nojaggie These smart TFT display shields can be easily Ready to use LCD module with resistive touch programmed by almost anyone to give in panel mountable bezel professional looking HMI / GUI s with no prior knowledge of complex graphics programming or USB DFU port for firmware updates mathematics. In built 8M Byte Eflash memory PWM audio supported and in built speaker amplifier 1.1 Features Support MikroBUS interface The CleO50 utilises the FTDI FT900 low power MCU to bridge between the Arduino and fast interface Support Micro SD card accessories such as MikroBUS, camera and SD Card Support camera interface input. For a full list of the FT900s features refer to the FT90X datasheet. In addition, the CleO50 has Support I2S interface the following features: Support CAN bus Support RTC function Designed as Arduino and NerO shield Compatible with FTDI CleO-RIO, CleO-Camera and CleO-Speaker CE and FCC certified Note: MikroBus interface is created by MikroElektronika is an open standard anyone can implement in their design. Please visit MikroE for more detail Neither the whole nor any part of the information contained in, or the product described in this manual, may be adapted or reproduced in any material or electronic form without the prior written consent of the copyright holder. This product and its documentation are supplied on an as-is basis and no warranty as to their suitability for any particular purpose is either made or implied. Future Technology Devices International Ltd will not accept any claim for damages howsoever arising as a result of use or failure of this product. Your statutory rights are not affected. This product or any variant of it is not intended for use in any medical appliance, device or system in which the failure of the product might reasonably be expected to result in personal injury. This document provides preliminary information that may be subject to change without notice. No freedom to use patents or other intellectual property rights is implied by the publication of this document. Future Technology Devices International Ltd, Unit 1, 2 Seaward Place, Centurion Business Park, Glasgow G41 1HH United Kingdom. Scotland Registered Company Number: SC136640 Copyright Bridgetek Limited 1 CleO50 Module Datasheet Version 1.0 Document Reference No.: FT 001342 Clearance No.: BRT 045 2 Ordering Information Part No. Description CleO50 module, with FPC/FFC 40 LCD connector, 5.0 inch TFT LCD display CleO50A panel preinstalled with resistive touch. Black bezel. CleO-RIO1 Arduino Shield for users to stack Arduino board on bottom of CleO50. CleO-CAM1 A camera plug-in module for CleO50. CleO-SPK1 A speaker enclosure with connecting wires to CleO50. 3 Program Support Demo applications are provided for CleO50 modules by FTDI. Visit FTDIs website