CleO50 Module Datasheet Version 1.1 Document Reference No.: BRT 000205 Clearance No.: BRT 045 Bridgetek Pte Ltd Datasheet CleO50 Module 1 Introduction Support landscape and portrait modes CleO50 is a smart TFT display shield for Arduino and MikroBUS. It includes a 5.0 inch 800x480 pixell In built Bridgetek FT812 embedded video TFT LCD panel with resistive touch, PWM audio engine (EVE) graphic controller output with in-built speaker amplifier for better Anti-aliased graphics throughout for much finer audio quality. For the convenience of user, speaker image quality with nojaggie cable with 1X4 socket to 2 pin wire ended and 1X2 socket is provided. Users can use their own Ready to use LCD module with resistive touch speaker. in panel mountable bezel These smart TFT display shields can be easily USB DFU port for firmware updates programmed by almost anyone to give In built 8M Byte Eflash memory professional looking HMI / GUI s with no prior knowledge of complex graphics programming or PWM audio supported and in built speaker mathematics. amplifier Support MikroBUS interface Support Micro SD card 1.1 Features Support camera interface CleO50 utilises the Bridgetek FT900 low power MCU to bridge between the Arduino and fast interface Support I2S interface accessories such as MikroBUS, camera and SD Card Support CAN bus input. For a full list of the FT900s features refer to the FT90X datasheet. In addition, CleO50 has the Support RTC function following features: Designed as Arduino and NerO shield Compatible with Bridgetek CleO-RIO, CleO- Camera and CleO-Speaker CE and FCC certified Note: MikroBus interface is created by MikroElektronika is an open standard anyone can implement in their design. Please visit MikroE for more detail Neither the whole nor any part of the information contained in, or the product described in this manual, may be adapted or reproduced in any material or electronic form without the prior written consent of the copyright holder. This product and its documentation are supplied on an as-is basis and no warranty as to their suitability for any particular purpose is either made or implied. Bridgetek Pte Ltd will not accept any claim for damages howsoever arising as a result of use or failure of this product. Your statutory rights are not affected. This product or any variant of it is not intended for use in any medical appliance, device or system in which the failure of the product might reasonably be expected to result in personal injury. This document provides preliminary information that may be subject to change without notice. No freedom to use patents or other intellectual property rights is implied by the publication of this document. Bridgetek Pte Ltd, 178 Paya Lebar Road, 07-03, Singapore 409030. Singapore Registered Company Number: 201542387H Copyright Bridgetek Pte Ltd 1 CleO50 Module Datasheet Version 1.1 Document Reference No.: BRT 000205 Clearance No.: BRT 045 2 Ordering Information Part No. Description CleO50 module, with FPC/FFC 40 LCD connector, 5.0 inch TFT LCD display CleO50A panel preinstalled with resistive touch. Black bezel. CleO-RIO1 Arduino Shield for users to stack Arduino board on bottom of CleO50. CleO-CAM1 A camera plug-in module for CleO50. CleO-SPK1 A speaker enclosure with connecting wires to CleO50. 3 Program Support Demo applications are provided for CleO50 modules by Bridgetek. Visit Bridgeteks website