Data Sheet ACNT-H61L, ACNT-H61LC Low Power 10-MBd Digital CMOS Optocoupler in 15-mm Stretched SO8 Package Description Features The Broadcom ACNT-H61L/H61LC is a stretched wide Low I power supply consumption: 2 mA max. DD optically coupled optocoupler that combines a light-emitting Input current capability: 4.5 mA min. diode and an integrated high gain photo detector to address Package: 15-mm stretched SO-8. the low power need for isolated interface. The optocoupler 20 kV/s minimum common-mode rejection (CMR) at consumes extremely low power, at maximum 2 mA across V = 1000 V. CM temperature. The LED forward current operates from 4.5 mA. High speed: 10 MBd min. The ACNT-H61LC has high comparative tracking index, Guaranteed AC and DC performance over wide CTI, of 600V (material group I). This allows a lower temperature range: 40C to +105C. creepage requirement of the regulatory safety standard. Comparative tracking index, CTI: 600V (Material Group I) - ACNT-H61LC This optocoupler supports both a 3.3V and a 5V supply Safety approval: voltage with guaranteed AC and DC operational parameters UL 1577 recognized: 7500 V for 1 minute from temperature range 40C to +105C. The output of the rms CSA approval detector IC is a CMOS output. The internal Faraday shield provides a guaranteed common-mode transient immunity IEC/EN 60747-5-5 V = 2262 V for reinforced IORM peak insulation specification of 20 kV/s. The ACNT-H61L/H61LC with 15-mm stretched SO-8 Applications package and high voltage insulation capability is suitable for Communication Interface: RS-485, CAN bus isolated communicate logic interface and control in high- Digital isolation for A/D, D/A conversion voltage power systems such as 690V drives, renewable AC inverters, and medical equipment. High-voltage power systems, e.g., 690V drives Renewable energy inverters Figure 1: Functional Diagram Medical imaging and patient monitoring NC VDD 1 8 CAUTION It is advised that normal static precautions be Anode 2 7 NC taken in handling and assembly of this component to prevent damage and/or Vo 6 Cathode 3 degradation that may be induced by ESD. The NC 5 GND 4 Shield components featured in this data sheet are not to be used in military or aerospace applications or environments. The components are not Table 1: Truth Table (Positive Logic) AEC-Q100 qualified and not recommended for Output V LED O automotive applications. ON L OFF H NOTE: A 0.1-F bypass capacitor must be connected between pins V and GND. DD Broadcom AV02-4677EN October 20, 2020NNNN NNNN YYWW EEE ACNT-H61L, ACNT-H61LC Data Sheet Low Power 10-MBd Digital CMOS Optocoupler in 15-mm Stretched SO8 Package Ordering Information ACNT-H61L/H61LC is UL Recognized with 7500 V for 1 minute per UL 1577. rms Option RoHS IEC/EN Part Number Package Surface Mount Tape & Reel UL 1577 Quantity Compliant 60747-5-5 ACNT-H61L -000E 15-mm X X X 80 per tube Stretched SO8 ACNT-H61LC -500E XXXX 1000 per reel To order, choose a part number from the Part Number column and combine with the desired option from the Option column to form an order entry. Package Outline Drawing ACNT-H61L/H61LC Stretched SO-8 Package Lead Free Device Part Number Land Pattern Recommendation 0.457 0.100 0.018 0.004 17.857 Ref 0.703 0.630 0.025 6.248 0.127 0.246 0.005 1.270 0.05 BSC Lot ID Date Code 15.01 14.047 1.905 Ref 0.591 0.553 0.075 13.600 0.127 0.535 0.005 0.254 0.050 3.607 0.127 0.010 0.002 0.142 0.005 7 0.20 0.10 0.008 0.004 7 8 Nom 7 0.635 Min Dimensions in mm inch 0.025 16.61 0.25 0.654 0.010 Maximum Mold Flash on each side is 0.127 mm 0.005 inch Note: Floating Lead Protusion is 0.15 mm 0.006 inch Max if applicable Solder Reflow Profile Recommended reflow condition as per JEDEC Standard, J-STD-020 (latest revision). Non-halide flux should be used. Regulatory Information The ACNT-H61L/H61LC is pending approval by the following organizations. IEC/EN 60747-5-5 UL Approval under UL 1577, component recognition program up to V = 7500 V File E55361. ISO RMS CSA Approval under CSA Component Acceptance Notice 5, File CA 88324. Broadcom AV02-4677EN 2 7