Data Sheet ACPL-077L Low-Power 3.3V/5V High-Speed CMOS Optocoupler Design for System-Level Reliability Description Features Enhance reliability relative to system-level The Broadcom ACPL-077L optocoupler utilizes the latest IEC 61000-4-Xtesting (ESD/Burst/Surge) CMOS IC technology to achieve outstanding speed and low 3.3V and 5V CMOS compatibility power performance of minimum 25-MBd data rate and 6-ns CMOS buffer input maximum pulse width distortion with enhanced reliability Allow level shifting functionality relative to system-level IEC 61000-4-X testing (ESD/Burst/ High speed: DC to 25 MBd Surge). 35-kV/s minimum common mode rejection (CMR) at Available in SO-8 package, the basic building blocks of V = 1000V CM ACPL-077L are a CMOS LED driver IC, a high-speed LED, Guaranteed AC and DC performance over wide and a CMOS detector IC. A CMOS logic input signal temperature:40 to +105C controls the LED driver IC, which supplies current to the Safety and regulatory approvals: LED. The detector IC incorporates an integrated UL recognized: photodiode, a high-speed transimpedance amplifier, and a 3750 V for 1 min. per UL1577 rms voltage comparator with an output driver. CSA component acceptance notice 5 IEC/EN/DIN EN 60747-5-5: V = 567 V for Option 060E IORM peak Lead-free option available CAUTION It is advised that normal static precautions be Applications taken in handling and assembly of this component to prevent damage and/or Digital fieldbus isolation: CC-Link, DeviceNet, Profibus, degradation, which may be induced by ESD. SDS The components featured in this data sheet are Multiplexed data transmission not to be used in military or aerospace General instrument and data acquisition applications or environments. Computer peripheral interface Microprocessor system interface Broadcom AV02-3547EN January 12, 2018ACPL-077L Data Sheet Low-Power 3.3V/5V High-Speed CMOS Optocoupler Design for System-Level Reliability Truth Table Functional Diagram V V LED1 I O **V 1 8 V ** DD1 DD2 HIGH OFF HIGH LOW ON LOW V 2 7 NC* I I O NC* 3 6 V O LED1 4 5 GND GND 1 2 SHIELD * Pin 3 is multiplexed as a test pin that can connect to V or DD left unconnected. Pin 7 is not connected internally. ** A 0.01 F to 0.1 F bypass capacitor must be connected as close as possible between pins V and GND , and V DD1 1 DD2 and GND . 2 Ordering Information ACPL-077L is UL Recognized with 3750 V for 1 minute per UL1577. rms Option Surface Tape IEC/EN/DIN EN Part Number RoHS Compliant Package Mount and Reel 60747-5-5 Quantity ACPL-077L -000E SO-8 X 100 per tube -060E X X 100 per tube -500E X X 1500 per reel -560E X X X 1500 per reel To order, choose a part number from the part number column and combine with the desired option from the option column to form an order entry. Example 1: ACPL-077L-500E to order product of Mini-flat Surface Mount 8-pin package in Tape and Reel packaging with RoHS compliant. Option data sheets are available. Contact your Broadcom sales representative or authorized distributor for information. Regulatory Information The ACPL-077L will be approved by the following organizations: UL Approval under UL 1577, component recognition program up to V = 3750 V . ISO RMS CSA Approval under CSA component acceptance notice 5. IEC/EN/DIN EN 60747-5-5 (Option 060E only) Broadcom AV02-3547EN 2