Data Sheet ACPL-267xL, ACPL-268KL, ACPL-560xL, 1 ACPL-563xL, ACPL-665xL, and 5962-08242 Hermetically Sealed, 3.3V High-Speed, High CMR, Logic Gate Optocouplers Description Features The Broadcom ACPL-267xL, ACPL-268KL, ACPL-560xL, Low power consumption ACPL-563xL, ACPL-665xL, and 5962-08242 units are 3.3V supply voltages single, dual, and quad channel, hermetically sealed Dual marked with device part number and DLA optocouplers. The products are capable of operation and Standard Microcircuit Drawing (SMD) storage over the full military temperature range and can be Manufactured and tested on a MIL-PRF-38534 Certified purchased as either standard commercial product or with Line full MIL-PRF-38534 Class Level H or K testing or from DLA QML-38534, Class H and K Standard Microcircuit Drawing (SMD) 5962-08242. All Four hermetically sealed package configurations devices are manufactured and tested on a MIL-PRF-38534 Performance guaranteed over full military temperature certified line and are included in the DLA Qualified range: 55C to +125C Manufacturers List QML-38534 for Hybrid Microcircuits. High speed: 10 Mbd typical CMR: >10,000 V/s typical 1500 Vdc withstand test voltage TTL circuit compatibility HCPL-260L/060L/263L/063L function compatibility Applications Military and aerospace CAUTION It is advised that normal static precautions be taken in handling and assembly of this High reliability systems component to prevent damage and/or Transportation, medical, and life critical systems degradation which may be induced by ESD. Line receiver Voltage level shifting Isolated input line receiver Isolated output line driver Logic ground isolation Harsh industrial environments Isolation for computer, communication, and test equipment systems 1. See Selection Guide Package Styles and Lead Configuration Options for available extensions. Broadcom AV02-1327EN January 11, 2019ACPL-267xL, ACPL-268KL, ACPL-560xL, ACPL-563xL, ACPL-665xL, and Hermetically Sealed, 3.3V High-Speed, 5962-08242 Data Sheet High CMR, Logic Gate Optocouplers Each channel contains a GaAsP light emitting diode that is Functional Diagram optically coupled to an integrated high-speed photon detector. The output of the detector is an open collector Multiple channel devices available. Schottky clamped transistor. Internal shields provide a guaranteed common mode transient immunity specification V CC of 1000 V/s. Package styles for these parts are 8- and 16- V E pin DIP through hole (case outlines P and E respectively), V OUT and 16-pin surface mount DIP flat pack (case outline F). Devices may be purchased with a variety of lead bend and plating options. See Selection Guide Package Styles and GND Lead Configuration Options for details. Standard Microcircuit Drawing (SMD) parts are available for each NOTE: An external 0.01-F to 0.1-F bypass capacitor package and lead style. must be connected as close as possible between Because the same electrical die (emitters and detectors) pin V and GND. CC are used for each channel of each device listed in this data sheet, absolute maximum ratings, recommended operating Truth Tables conditions, electrical specifications, and performance characteristics shown in the figures are identical for all parts. (Positive Logic) Occasional exceptions exist due to package variations and limitations, and are as noted. Additionally, the same Multichannel Devices package assembly processes and materials are used in all devices. Input Output On (H) L Off (L) H Single-Channel DIP Input Enable Output On (H) H L Off (L) H H On (H) L H Off (L) L H Broadcom AV02-1327EN 2