ACPL-K34T-560E Broadcom

ACPL-K34T Automotive 2.5 A Peak High Output Current MOSFET Gate Drive Optocoupler with Rail-to-Rail Output Voltage in Stretched SO8 Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available -xxxE denotes a lead-free product Description Features 2 Avago s 2.5 Amp Automotive R Coupler Gate Drive Op- Qualified to AEC-Q100 Grade 1 Test Guidelines tocoupler contains an AlGaAs LED, which is optically cou- Automotive temperature range: -40 C to 125 C pled to an integrated circuit with a power output stage. Peak output current: 2.0 A min. The ACPL-K34T features fast propagation delay and tight timing skew, is ideally designed for driving power MOS- Rail-to-rail output voltage FETs used in AC-DC and DC-DC converters. The high oper- Propagation delay: 110 ns max. ating voltage range of the output stage provides the drive Dead time distortion: +50 ns/-40 ns voltages required by gate controlled devices. The voltage and high peak output current supplied by this optocou- LED current input drive with hysteresis pler make it ideally suited for direct driving power MOS- Common Mode Rejection (CMR): 50 kV/s min. at V CM FETs at high frequency for high efficiency conversion. = 1500 V 2 Avago R Coupler isolation products provide reinforced Low supply current allow bootstrap half-bridge insulation and reliability that delivers safe signal isolation topology: I = 3.9 mA max. CC critical in automotive and high temperature industrial ap- Under Voltage Lock-Out (UVLO) protection with plications. hysteresis for power MOSFET Wide operating V range: 10 V to 20 V Functional Diagram CC Safety Approvals: ANODE 8 VCC 1 - UL Recognized 5000 V for 1 min RMS - CSA NC 2 7 V OUT - IEC/EN/DIN EN 60747-5-5 V = 1140 V IORM peak CATHODE 3 6 NC Applications Hybrid Power Train DC/DC Converter NC 4 5 V EE SHIELD EV/PHEV Charger Figure 1. ACPL-K34T Functional Diagram Automotive Isolated MOSFET Gate Drive Note: Minimum 1 F bypass capacitor must be connected between pins AC and Brushless DC motor drives V and V . CC EE Truth Table LED V V V CC EE OUT OFF 0 20V LOW ON <V LOW UVLO- ON >V HIGH UVLO+ CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD. Ordering Information Option Surface Tape UL 5000 V / IEC/EN/DIN EN rms Part number (RoHS Compliant) Package Mount & Reel 1 Minute rating 60747-5-5 Quantity ACPL-K34T -000E Stretched X X 80 per tube SO-8 -060E X X X 80 per tube -500E X X X 1000 per reel -560E X X X X 1000 per reel To order, choose a part number from the part number column and combine with the desired option from the option column to form an order entry. Example 1: ACPL-K34T-560E to order product of SSO-8 Surface Mount package in Tape and Reel packaging with IEC/EN/DIN EN 60747-5-5 Safety Approval in RoHS compliant. Option datasheets are available. Contact your Avago sales representative or authorized distributor for information. Package Outline Drawings (Stretched SO8) RECOMMENDED LAND PATTERN 5.850 0.254 (0.230 0.010) PART NUMBER DATE CODE 8 7 6 5 12.650 (0.498) KXXT 6.807 0.127 YWW (0.268 0.005) RoHS-COMPLIANCE EE INDICATOR 1.905 (0.075) 1 2 3 4 EXTENDED DATECODE 0.64 1.590 0.127 FOR LOT TRACKING (0.025) (0.063 0.005) 7 45 0.450 (0.018) 3.180 0.127 (0.125 0.005) 0.750 0.250 0.254 0.100 0.200 0.100 (0.0295 0.010) 0.381 0.127 (0.010 0.004) (0.008 0.004) (0.015 0.005) 11.50 0.250 1.270 (0.453 0.010) (0.050) BSG Dimensions in millimeters and (inches). Note: Lead coplanarity = 0.1 mm (0.004 inches). Floating lead protrusion = 0.25mm (10mils) max. Recommended Pb-Free IR Profile Recommended reflow condition as per JEDEC Standard, J-STD-020 (latest revision). Note: Non-halide flux should be used 2