ACPL-M61U-000E Wide Operating Temperature 10MBd Digital Optocoupler 2 with R Coupler Isolation Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available -xxxE denotes a lead-free product Description Features This small outline wide operating temperature, high High Temperature and Reliability CANBus communica- CMR, high speed, logic gate optocoupler is a single tion interface for Industrial Application. channel device in a five lead miniature footprint. Min 10 kV/s High Common-Mode Rejection at V = 1000 V CM The ACPL-M61U optically coupled gates combine a Compact, Auto-Insertable SO5 Packages AlGaAs light emitting diode and an integrated high Wide Temperature Range: -40C ~ 125C gain photo detector. The output of the detector IC is High Speed: 10MBd (Typical) an Open-collector Schottky-clamped transistor. The internal shield provides a guaranteed minimum common Low LED Drive Current: 6.5mA (typ) mode transient immunity specification of 10,000 V/s at Low Propagation Delay: 100ns (max) V =1000V. CM Worldwide Safety Approval: This optocoupler is suitable for use in industrial high - UL 1577, 3750 V /1 min. speed communications logic interfacing with low propa- RMS gation delays, input/output buffering and is recommend - - CSA File CA88324, Notice 5 ed for use in high operating temperature environment. Applications This unique design provides maximum AC and DC circuit isolation while achieving TTL compatibility. The optocou- CANBus Communications Interface pler AC and DC operational parameters are guaranteed High Temperature Digital Signal Isolation from -40C to 125C. Micro-controller Interface 2 Avago R Coupler isolation products provide the reinforced Digital isolation for A/D, D/A conversion insulation and reliability needed for critical in automotive and high temperature industrial applications. Schematic Functional Diagram I + I F CC V CC 6 1 I O V O 5 ANODE 1 6 V CC 5 V O - 3 4 GND CATHODE GND 4 3 SHIELD TRUTH TABLE (POSITIVE LOGIC) The connection of a 0.1 F bypass capacitor between pins 4 and 6 is LED OUTPUT USE OF A 0.1 F BYPASS CAPACITOR recommended. ON L MUST BE CONNECTED BETWEEN PINS OFF H 6 AND 4 (SEE NOTE 1). CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD.Ordering Information Option Part number RoHS Compliant Package Surface Mount Tape & Reel Quantity -000E X 100 per tube ACPL-M61U SO-5 -500E X X 1500 per reel To order, choose a part number from the part number column and combine with the desired option from the option column to form an order entry. Example 1: ACPL-M61U-500E to order product of SO-5 Surface Mount package in Tape and Reel packaging with RoHS compliant. Example 2: ACPL-M61U-000E to order product of SO-5 Surface Mount package in tube packaging with RoHS compliant. Option datasheets are available. Contact your Avago sales representative or authorized distributor for information. Package Outline Drawings ACPL-M61U-000E Small Outline SO-5 Package (JEDECMO-155) LAND PATTERN RECOMMENDATION 0.64 0.33 (0.013) (0.025) 1.27 (0.05) M61U 7.0 0.2 4.4 0.1 YWW (0.276 0.008) (0.173 0.004) 4.39 8.26 (0.17) (0.325) 0.4 0.05 1.80 (0.016 0.002) (0.071) 3.6 0.1* 2.54 (0.142 0.004) (0.10) 0.102 0.102 0.216 0.038 2.5 0.1 (0.004 0.004) (0.0085 0.0015) (0.098 0.004) 7 MAX. 1.27 0.71 BSC MIN (0.028) (0.050) MAX. LEAD COPLANARITY = 0.102 (0.004) DIMENSIONS IN MILLIMETERS (INCHES) * MAXIMUM MOLD FLASH ON EACH SIDE IS 0.15 mm (0.006) NOTE: FLOATING LEAD PROTRUSION IS 0.15 mm (6 mils) MAX. Reflow Soldering Profile The recommended reflow soldering conditions are per JEDEC Standard J-STD-020 (latest revision). Non-halide flux should be used. 2