ACPL-M62L-500E Broadcom

ACPL-M62L Ultra Low Power 10 MBd Digital Optocoupler Data Sheet Description Features The ACPL-M62L is an optically-coupled optocoupler that Ultra-low current I consumption: 1.5 mA max. DD combines an AlGaAs light-emitting diode and an inte- Low input current capability: 2 mA grated high-gain photo detector addresses the low power Open-drain output need. The optocoupler consumes low power at maximum 1.5 mA I across temperature. The forward current is as SO-5 package DD low as 2 mA, and so allows direct current drive by most 20 kV/s minimum Common Mode Rejection (CMR) at microprocessors. V = 1000 V CM ACPL-M62L support both 3.3 V and 5 V supply voltage High Speed: 10 MBd min. with guaranteed AC and DC operational parameters from Guaranteed AC and DC performance over wide -40 C to +105 C. The output of the detector IC is an temperature: -40 C to +105 C open-drain type. The internal Faraday shield provides a Safety and regulatory approval (pending): guaranteed common mode transient immunity specifica - tion of 20 kV/s. UL 1577 recognized - 3750 V for 1 minute rms This unique design provides maximum AC and DC circuit CSA Approval isolation while achieving TTL/CMOS compatibility. These IEC/EN/DIN EN 60747-5-5 for Reinforced Insulation optocouplers are suitable for high speed logic interfacing, while consuming extremely low power. Applications 2 Communication interface: I C-bus, CAN Bus Functional Diagram Microprocessor system interfaces 6 V DD Truth table (Positive Logic) Digital isolation for A/D, D/A conversion Anode 1 LED OUTPUT 5 V o ON L 3 Cathode OFF H 4 GND Shield A 0.1 F bypass capacitor must be connected between pins V and GND. DD CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation, which may be induced by ESD. Ordering Information ACPL-M62L is UL Recognized with 3750 V for 1 minute per UL1577. rms Option IEC/EN/DIN EN Part number RoHS Compliant Package Surface Mount Tape & Reel 60747-5-5 Quantity ACPL-M62L -000E SO-5 X 100 per tube -060E X X 100 per tube -500E X X 1500 per reel -560E X X X 1500 per reel To order, choose a part number from the Part number column and combine with the desired option from the Option column to form an order entry. Example: ACPL-M62L-560E: to order product of Small Outline SO-5 package in Tape and Reel packaging with IEC/EN/DIN EN 60747-5-5 Safety Approval in RoHS compliant. Option datasheets are available. Contact your Avago sales representative or authorized distributor for information. Package Outline Drawing ACPL-M62L SO-5 Package LAND PATTERN RECOMMENDATION 0.64 (0.025) 1.27 (0.05) RoHS-COMPLIANCE INDICATOR PART NUMBER DATE CODE MXXX 7.0 0.2 4.4 0.1 (0.276 0.008) 4.39 8.26 (0.173 0.004) XXX (0.17) (0.325) 1.80 (0.071) 0.4 0.05 (0.016 0.002) 2.54 (0.10) 3.6 0.1* (0.142 0.004) 0.102 0.102 0.15 0.025 2.5 0.1 (0.004 0.004) (0.006 0.001) (0.098 0.004) 7 MAX. 1.27 0.71 BSC MIN (0.028) (0.050) MAX. LEAD COPLANARITY Dimensions in millimeters (inches). = 0.102 (0.004) Note: Floating Lead Protrusion is 0.15 mm (6 mils) max. * Maximum Mold Flash on each side is 0.15 mm (0.006). 2