ACPL-M71T-500E Broadcom

ACPL-M71T and ACPL-M72T High Speed, Low Power Digital Optocouplers 2 with R Coupler Isolation and AEC-Q100 Grade 1 Qualification Data Sheet Description Features The Avago ACPL-M71T and ACPL-M72T are high tem- 5 V CMOS compatible perature, digital CMOS optocouplers in SOIC-5 packages. Common-Mode Rejection 40kV/s V =1000V: CM Suitable for hybrid and electric vehicle applications, Wide automotive temperature range: 40C to 125C the optocouplers use the latest CMOS IC technology to achieve outstanding performance and very low power Low propagation delay : consumption. All devices are AEC-Q100 compliant and High Speed ACPL-M71T: 26ns I = 10 mA (Typical) F operate over the 40C to 125 C temperature range. Low Power ACPL-M72T: 60ns I = 4 mA (Typical) F The ACPL-M71T uses a high speed LED, and the ACPL-M72T Worldwide safety approval: uses a low current LED for lower power dissipation. The UL 1577 recognized, 4000 Vrms / 1 min high speed ACPL-M71T featuring a 35 ns maximum CSA approved propagation delay (I =10 mA). The ACPL-M72T optocou- F IEC/EN/DIN EN 60747-5-5 pler features very low power. With a low 4 mA LED drive Qualified to AEC-Q100 Grade 1 test guidelines current, ACPL-M72T typical propagation delay is 60 ns. Each digital optocoupler has a CMOS detector IC, an in- Applications tegrated photodiode, a high speed transimpedance Automotive CANBus communications interface amplifier, and a voltage comparator with an output driver. Automotive isolated high speed gate drivers for IGBTs and Power MOSFETs 2 Avago R Coupler isolation products provide the rein- High temperature digital signal isolation forced insulation and reliability needed for critical in auto- motive and high temperature industrial applications Microcontroller interface Digital isolation for A/D and D/A conversion Functional Block Diagram ACPL-M71T/ACPL-M72T 6 Vdd 1 Anode 5 Truth Table V o LED Output (V ) O Cathode 3 OFF H Gnd 4 ON L Note: A 0.1 F bypass capacitor must be connected between pins 4 and 6. CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD. Ordering Information Option IEC/EN/DIN EN Part Number (RoHS) Compliant Package Surface Mount Tape & Reel 60747-5-5 Quantity ACPL-M71T -000E SO-5 X 100 per tube -060E X X 100 per tube -500E X X 1500 per reel -560E X X X 1500 per reel ACPL-M72T -000E SO-5 X 100 per tube -060E X X 100 per tube -500E X X 1500 per reel -560E X X X 1500 per reel To order, choose a part number from the part number column and combine with the desired option from the option column to form an order entry. For example, the part number ACPL-M71T-500E describes a device with a surface mount SOIC-5 package delivered in Tape and Reel with 1500 parts per reel and full RoHS compliance. Option datasheets are available. Contact your Avago sales representative or authorized distributor for information. Package Dimensions ACPL-M71T / ACPL-M72T (JEDEC MO-155 Package) 6 V ANODE 1 CC M71T 7.0 0.2 5 V 4.4 0.1 OUT (0.276 0.008) YWW (0.173 0.004) EE CATHODE 3 4 GND Extended Datecode for lot tracking 0.4 0.05 (0.016 0.002) 3.6 0.1* (0.142 0.004) 0.102 0.102 0.20 0.025 2.5 0.1 (0.004 0.004) (0.008 0.001) (0.098 0.004) 7 MAX. 1.27 0.71 BSC MIN (0.028) (0.050) MAX. LEAD COPLANARITY = 0.102 (0.004) DIMENSIONS IN MILLIMETERS (INCHES) * MAXIMUM MOLD FLASH ON EACH SIDE IS 0.15 mm (0.006) NOTE: FLOATING LEAD PROTRUSION IS 0.15 mm (6 mils) MAX. 2