Data Sheet ACSL-7210 Dual-Channel (Bidirectional) 25-MBd CMOS Buffered Input Digital Optocoupler Description Features The Broadcom ACSL-7210 is a dual-channel bidirectional Dual-channel (opposite direction orientation) 25-MBd digital optocoupler that uses CMOS IC technology High-speed: DC to 25 MBd and patented packaging technologies to achieve high 3.3V and 5V CMOS compatibility isolation voltage 3750 V in a < 2 mm low profile RMS CMOS input and output narrow-body SOIC-8 package. The device optimizes for 25 kV/s minimum common mode rejection (CMR) at bidirectional industrial communication networks, such as V = 1000V CM Fieldbus (PROFIBUS) and Serial Peripheral Interface (SPI) Guaranteed AC and DC performance over wide applications. temperature: 40C to +105C Safety and regulatory approvals: The main building blocks of the ACSL-7210 for each UL 1577 3750 V for 1 minute rms channel are a CMOS LED driver IC that is controlled by a IEC/EN/DIN EN 60747-5-5 for reinforced insulation CMOS logic input signal, a high-speed LED, and a CMOS 567 V PEAK detector IC. These building blocks allow fast propagation delay of 40 ns and short pulse width distortion of 10 ns Applications maximum. Digital field bus isolation: PROFIBUS, CC-Link, DeviceNet, SDS The ACSL-7210 has common-mode noise immunity of Multiplexed data transmission typical 35 kV/s at 1000 V , with UL recognized with CM isolation voltage of 3750 V for 1 minute, and IEC/EN/ General instrument and data acquisition RMS DIN EN 60747-5-5 working insulation voltage V of Computer peripheral interface IORM 567 V with reinforced insulation. Microprocessor system interface PEAK CAUTION Take normal static precautions in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD. The components featured in this data sheet are not to be used in military or aerospace applications or environments. Broadcom AV02-4235EN February 27, 2019ACSL-7210 Data Sheet Dual-Channel (Bidirectional) 25-MBd CMOS Buffered Input Digital Optocoupler Functional Diagram Truth Table Input Side Output Side 8 VDD VDD 2 1 1 State State V V V V LED DD DD I O 7 2 VO VI A A Power Power HIGH OFF HIGH Supplied Supplied LOW ON LOW No Power Power XOFF HIGH VI 3 B Supplied 6 VO B 4 GND 1 5 GND 2 Shield ACSL-7210 NOTE: A 0.1-F bypass capacitor must be connected as close as possible between the power supply pins, VDD1 and GND1, VDD2 and GND2. Ordering Information Option IEC/EN/DIN EN Part Number RoHS Compliant Package Surface Mount Tape and Reel 60747-5-5 Quantity ACSL-7210 -00RE SO-8 X 100 per tube -06RE X X 100 per tube -50RE X X 1500 per reel -56RE X X X 1500 per reel To order, choose a part number from the part number column and combine with the desired option from the option column to form an order entry. Example 1: ACSL-7210-50RE to order RoHS-compliant Surface Mount 8-pin package in Tape-and-Reel packaging. Option data sheets are available. Contact your Broadcom sales representative or authorized distributor for information. Broadcom AV02-4235EN 2