AFBR-2CARxxZ 10G Ethernet SFP+ Active Optical Cable (AOC) Product Brief Description Features Proven High Reliability 850 nm technology: Avago The Avago Technologies AFBR-2CARxxZ Active Optical VCSEL transmitter and Avago PIN receiver Cable (AOC) is part of a family of SFP+ products to serve Maximum power dissipation 350 mW per Active 10Gb Ethernet (10GbE) applications. The letters xx of Cable end the part number AFBR-2CARxxZ denote the cable length in meters. The AFBR-2CARxxZ AOC enables 10GbE Avago SFP+ package design enables equipment EMI equipment designs with very high port density based performance in high port density applications with on the electrical and mechanical specification enhance - margin to Class B limits ments to the well known SFP specifications developed Specifications by the SFF Committee. The specifications are referred to as SFP+ to represent the enhancements over previous Electrical specifications per SFF-8431 Specifications SFP specifications. The SFP+ AOC have a cable length up for Enhanced Small Form Factor Pluggable Module to 20m. These AOCs can be used as an alternative so- SFP+ lution to SFP+ passive and active copper cables, while 0 to 70 C case temperature operating range providing improved signal integrity, longer distances, Rx LOS and Tx DISABLE supported superior electromagnetic immunity and better bit error rate performance. Mechanical specifications per SFF Committee SFF 8432 Improved Pluggable Formfactor IPF Part Numbers Compliant to Restriction on Hazardous Substances (RoHS) per EU and China requirements AFBR-2CAR01Z 1 meter SFP+ Active Optical Cable Class 1 eye safe per requirement of EN 60825-1 2007, AFBR-2CAR02Z 2 meter SFP+ Active Optical Cable EN 60825-2 A2 2010 AFBR-2CAR03Z 3 meter SFP+ Active Optical Cable 1E-15 BER performance AFBR-2CAR05Z 5 meter SFP+ Active Optical Cable AFBR-2CAR07Z 7 meter SFP+ Active Optical Cable Applications AFBR-2CAR10Z 10 meter SFP+ Active Optical Cable 1/10 Gigabit Ethernet (1/10GbE) AFBR-2CAR15Z 15 meter SFP+ Active Optical Cable 1/2/4/8G Fibre Channel (1/2/4/8GFC), Fibre Channel AFBR-2CAR20Z 20 meter SFP+ Active Optical Cable InfiniBand (QDR/DDR/SDR) AFCT-5016Z SFP+ Evaluation Board Data Center Networking - Converged Enhanced Ethernet Data Centers - Data Center Bridging Networked storage systems High Performance Computing Proprietary Interconnects Patent - www.avagotech.com/patents 15.2 Uncompressed LABEL COLOR TAG Top - 1 20.1 51 8.60.1 Right - 1 Front - 1 2.550.1 1.40.1 65 30 Bottom - 1 Key Parameters Parameter Value Units Notes Data rate per lane From 1 to 10.3125 Gbps No retimer or CDR devices embedded in the module. Allows operation at datarates below 10.3125 Gbps Protocols 1 GbE, 10GbE Ethernet, Fibre Channel, InfiniBand, Other Protocols 1/2/4/8/10 GFC and Proprietary Datarates as well SDR/DDR QDR Power Supply Voltage 3.3 V 5% Temperature Range 0 - 70 C Wavelength 850 nm Bit Error Rate Performance 1E-15 Management Interface Two-Wire Serial Memory Map access Page A0h only per SFF-8472 Revision 11.0 Laser Output Power Class 1 EN 60825-1 2007, EN 60825-2 A2 2010 Power consumption per end 275 mW Nominal Power Mechanical Specification Mechanical specifications per SFF Committee SFF-8432 Improved Pluggable Formfactor IPF Can be installed in any INF-8074 or SFF-8431/2 compliant Small Form Pluggable (SFP) port Electrical Interface 20 pins SFF Committee SFF 8431 Specifications for Enhanced 8.5 and 10 Gigabit Small Form Factor Pluggable Module SFP+ For product information and a complete list of distributors, please go to our website: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright 2005-2014 Avago Technologies. All rights reserved. AV02-4473EN - March 21, 2014 PRELIMINARY DATA