AFBR-4595Z Broadcom

AFBR-4595Z Simple Cutting Tool for Polymer Optical Fiber (POF) Data Sheet Description Mechanical and aperture dimensions Avago Technologies AFBR-4595Z simple cutting tool provides 45mm high quality polymer optical fiber (POF) terminations without the need for polishing. The versatile, inexpensive and easy to use tool is ideally suited Jede ffnung nur einmal benutzen for laboratory use or field installations where a low number of Please use each hole once POF terminations are required. This product is RoHS compliant. The tool features various different aperture sizes: 0.75 and 1.0 mm bare fibers Simplex and duplex jacketed fibers with 1.5 and 2.2mm Hole diameters jacket diameter 2 x 1.6 x 3.2mm 2 x 1.6mm There are six apertures for simplex jacketed fiber with 1.5mm 2 x 1.3mm jacket diameter fiber and one aperture for duplex jacketed 2 x 1.1mm fiber with 2.2mm jacket diameter. Table 1 Technical Data 6 x 2.4mm 2.4 x 4.6mm Material: Plastic, Stainless Steel Storage Temperature: -40C to +85C NOTE: Each aperture/hole should only be used once Operating Temperature: -20C to +70C Dimensions: 45 x 30.5 x 8 mm Weight: 13g No. of fiber cuts: 15 (once/aperture) Avago Technologies - 1 - 30.5mmPOF termination procedure POF termination surface examples To ensure good termination of simplex and duplex POF 1mm POF simplex fiber with 2.2mm jacket diameter jacketed cables please complete the following steps. Step 1: Ensure the correct aperture is used for the fiber being cut. Lift the blade and insert fiber into the aperture until approximately 10mm protrudes from the other side. Simplex POF Cable Duplex POF Cable 1mm POF Duplex fiber with 2.2mm jacket diameter Step 2: Gently push down the blade until the fiber is fully cut. Simplex POF Cable Duplex POF Cable Step 3: Remove the POF fiber and inspect POF end surface for Ordering information damage. Repeat steps 2 and 3 if necessary. One bag contains 10 simple POF cutters Simplex POF Cable Duplex POF Cable For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago Technologies and the A logo are trademarks of Avago Technologies in the United States and other countries. All other brand and product names may be trademarks of their respective companies. Data subject to change. Copyright 2015 Avago Technologies. All Rights Reserved. pub-005213 November 18, 2015