AFCT-5944xxxZ, AFCT-5943xxxZ, AFCT-5942xxxZ Single Mode SFF Transceivers for SONET OC-48/SDH STM-16 Multirate Operation Qualification Report (2000hrs) Summary Testing The AFCT-5944xxxZ, AFCT-5943xxxZ and AFCT-5942xxxZ In order to demonstrate mechanical integrity, rugged- transceivers have been qualified with reference to ness and endurance, AFCT-5944ALZ and AFCT-5944ATLZ Telcordia Document GR-468-CORE under the supervision modules were subjected to Accelerated Stress Tests as of Avago Technologies Quality and Reliability Depart- shown in Table 1. The devices were tested for all key pa- ment. rameters before and after each test leg. Receiver sensitiv- ity and transmitter output power were used to confirm This report summarizes the qualification tests over a correct functionality of the module. range of environmental and mechanical extremes that were carried out. Most of the qualification legs, detailed in Table 1, are tested in-house. Where the facilities do not exist, the work Introduction was conducted externally. The AFCT-5944xxxZ, AFCT-5943xxxZ and AFCT-5942xxxZ Results are high performance, effective modules for serial optical data communications applications that range Table 1 summarizes the qualification test legs, test refer - from 125 Mb/s to 2.7 Gb/s. They are designed to provide ences, conditions, sample size and results. SONET/SDH compliant links at 2488 Mb/s for both short Appendix A shows the details test results of receiver sen- and intermediate reach links. sitivity and transmitter output power at qualification The modules are designed for single mode fiber and release point. operate at a nominal wavelength of 1300 nm. The trans- Conclusion mitter section of the AFCT-594xLZ/ALZ/GZ/AGZ incor- porates a 1300 nm Fabry Perot (FP) laser. The transmitter At the time of publication of this report, the AFCT- in the AFCT-594xTLZ/ATLZ/TGZ/ATGZ uses a Distributed 5944ALZ and AFCT-5944ATLZ qualification test legs have Feedback (DFB) Laser. successfully passed the product qualification full release points as defined by Avago Technologies Quality and Reli - ability Department.Table 1. AFCT-5944ALZ and AFCT-5944ATLZ Qualification Test Summary Sample Test Results 2 Leg Test Reference Stress Condition Size (Fail/Pass) 1a Mechanical MIL-STD-883 1500g, 0.5ms, 5 shocks/axis, 6 axis 11 x AFCT- 0/11 1 Shock Method 2002B 5944ALZ Post Shock test 1b Mechanical MIL-STD-883 20g, 20-2000Hz, 0/11 1 Vibration Method 2007A 4 min/cycle, 4 cycles/axis, 3 axis Post Vibration 2.1 Temperature MIL-STD-883 Ta = -40C to +100C, 11 x AFCT- 0/11 1000 cycles Cycling Method 1010 15min dwell, 5944ALZ 5min transfer 1000 cycles for release 2.2 Temperature MIL-STD-883 Ta = -40C to +100C, 11 x AFCT- 0/11 1000 cycles Cycling Method 1010 15min dwell, 5944ATLZ 5min transfer 1000 cycles for release 3 Biased Cyclic MIL-STD-883 Ta= -10C to +65C, biased 11 x AFCT- 0/11 40 cycles Moisture Method 1004 Power on/off 30 min 5944ALZ Resistance RH= 95%, (1 cycle per day) 20 cycles for release 40 cycles for info 4.1 High Temperature Section 5.18 (GR- Ta = +85C, rated power 25 x AFCT- 0/25 2000 hours Operating Life 468-CORE) 1000hours for provisional release 5944ALZ (HTOL) 2000 hours for full release, 4.2 High Temperature Section 5.18 (GR- Ta = +85C, rated power 25 x AFCT- 0/25 2000 hours Operating Life 468-CORE) 1000hours for provisional release 5944ATLZ (HTOL) 2000 hours for full release, 5.1 Unbiased Damp MIL-STD-402 Ta = +85C, RH = 85%, Unbiased, 11 x AFCT- 0/11 2000 hours Heat Method 103 1000hours for provisional release 5944ALZ 2000hours for full release 5.2 Unbiased Damp MIL-STD-402 Ta = +85C, RH = 85%, Unbiased, 11 x AFCT- 0/11 2000 hours Heat Method 103 1000hours for provisional release 5944ATLZ 2000hours for full release 6.1 Low Temperature GR-468-CORE Ta = -40C, 11 x AFCT- 0/11 2000 hours Storage 1000hours for provisional release 5944ALZ 2000hours for full release 6.2 Low Temperature GR-468-CORE Ta = -40C, 11 x AFCT- 0/11 2000 hours Storage 1000hours for provisional release 5944ATLZ 2000hours for full release 7 Thermal Shock MIL-STD-883 Ta = -40C to 85C 11 x AFCT- 0/11 100 cycles (Air-Air) Method 1011 100 cycles for release 5944ALZ 8a ESD test - Contact IEC 61000-4-2 8000V 5 x AFCT- 0/5 8000V 1 Discharge 10 zaps on electrical faceplate on panel 5944ALZ Live traffic 8b ESD test - Air IEC 61000-4-2 15000V 0/5 15000V 1 Discharge Live Traffic 1 9a HBM ESD MIL-STD-883 1000V, 2000V 6 x AFCT- 0/6 2000V Method 3015 5944ALZ 9b High Temperature Section 5.18 (GR- Ta = +85C, rated power, 0/6 1000hrs Operating Life 468-CORE) post HBM ESD test 1 (HTOL) 1000 hours, for info only 2