ALMD-EL3E, ALMD-EG3E, ALMD-CM3E, ALMD-CB3E High Brightness SMT Round Amber, Red, Green, and Blue LED Lamps Data Sheet Description Features The new Avago ALMD-xx3E LED series has the same or just Compact form factor slightly less luminous intensity than conventional high High brightness material brightness, through-hole LEDs. Available in Red, Amber, Green, and Blue colors The new LED lamps can be assembled using common SMT Red AlInGaP 626 nm assembly processes and are compatible with industrial reflow Amber AlInGaP 590 nm soldering processes. Green InGaN 525 nm The LEDs are made with an advanced optical grade epoxy for Blue InGaN 470 nm superior performance in outdoor sign applications. JEDEC MSL 2A Compatible with reflow soldering process For easy pick and place assembly, the LEDs are shipped in tape and reel. Every reel is shipped from a single intensity and color Typical viewing angle: 30 binexcept the red colorfor better uniformity. Tinted lens CAUTION InGaN devices are Class 1C HBM ESD sensitive, Applications AlInGaP devices are Class 1B ESD sensitive per JEDEC Standard. Please observe appropriate Full color signs precautions during handling and processing. Mono color signs Refer to Application Note AN-1142 for additional details. CAUTION Customer is advised to always keep the LED in the MBB with <5% RH when not in use because prolonged exposure to environment might cause the silver-plated leads to tarnish or rust, which might cause difficulties in soldering. Avago Technologies - 1 -ALMD-EL3E, ALMD-EG3E, ALMD-CM3E, ALMD-CB3E Package Dimensions Data Sheet Package Dimensions Package Marking A A 4.20 C C A: Anode C: Cathode 4.20 4.75 0.50 6.50 0.50 3.40 0.50 1.60 0.50 A C 2.50 1.4 (4) 1.00 NOTE 1. All dimensions in millimeters (inches). 2. Tolerance is 0.20 mm, unless other specified. 3. Midsteel lead frame. Device Selection Guide b c d Luminous Intensity Iv (mcd) , , Color and Dominant e Part Number Viewing Angle Typ - a Wavelength (nm) Typ d Min Max ALMD-EG3E-VX002 Red 626 4200 9300 30 ALMD-EL3E-VX002 Amber 590 4200 9300 ALMD-CM3E-Y1002 Green 525 9300 21000 ALMD-CB3E-SU002 Blue 470 1900 4200 a. Dominant wavelength, , is derived from the CIE Chromaticity Diagram and represents the color of the lamp. d b. The luminous intensity is measured on the mechanical axis of the lamp package and it is tested with pulsing condition. c. The optical axis is closely aligned with the package mechanical axis. d. Tolerance for each bin limit is 15%. e. is the off-axis angle where the luminous intensity is half the on-axis intensity. Avago Technologies - 2 -