Data Sheet ASMT-FJ10-AHJ00 Surface Mount AF Lamp Eye Safety Description This orange Surface Mount AF Lamp is used for a camera The Broadcom ASMT-FJ10-AHJ00 is a surface mount application. The LEDs have lenses, which focus the beam technology (SMT) dome lamp that uses an untinted, at about 10 mm from the front of the lens, from where the nondiffused lens to provide a high luminous intensity within beam diverges relatively slowly. If the LEDs are placed in a a narrow radiation pattern. The device is made by product, they create a Class 1 LED to IEC/EN 60825-1 encapsulating an LED chip on axial lead frame to form a (2001) under all conditions of operation and single fault molded epoxy lamp package with six bended leads for failure, as long as no collimating optics are added to the surfacing mounting. optical path. This lamp type LED utilizes Aluminum Indium Gallium Phosphide (AlInGaP) material technology. The AlInGaP Features material has a very high luminous efficiency, capable of producing high light output over a wide range of drive Smooth, consistent narrow radiation pattern currents. The color available for this SMT lamp package is 8 view angle 605-nm orange. 4.8L 4.8W 5.33H mm package dimension Good intensity output This narrow angle SMT lamp package is designed for Compatible with IR solder reflow applications that require long distance illumination and Available in 16-mm tape on 15 (380mm) diameter reels narrow beam pattern, such as an auxiliary flash for auto- Clear, non-diffused epoxy focus function in a digital still camera. In order to facilitate IEC/EN 60825-1 Eye Safety Class 1 pick-and-place operation, this SMT lamp is shipped in tape RoHS compliant and reel, with 1000 units per reel. This package is compatible with Pb-free IR soldering process. Applications Camera CAUTION This LED is ESD sensitive. Please observe appropriate precautions during handling and processing. Refer to application note AN-1142 for additional details. Broadcom AV02-0133EN October 30, 2017ASMT-FJ10-AHJ00 Data Sheet Surface Mount AF Lamp Figure 1: Package Dimensions 5.20 0.10 4.80 Pin: 1,2,4 - Anode Pin: 3,5,6 - Cathode 4.32 0.1 0.15 NOTE: 1. All Dimensions in millimeters. 2. Tolerance is 0.1 mm unless otherwise specified. Device Selection Guide Max. l (cd) Max. l (cd) Color Part Number Test Current (mA) Dice Technology V V Orange ASMT-FJ10-AHJ00 25.5 56.0 20 AllnGaP NOTE: 1. The luminous intensity, I , is measured at the mechanical axis of the lamp package. The actual peak of the V spatial radiation pattern may not be aligned with this axis. 2. I tolerance = 15%. V Broadcom AV02-0133EN 2 4.80 0.10 5.33 0.10 1.27 3.92 0.51