ASMT-FJ30 Mini Surface Mount AF LED Data Sheet Description Features Avago Technologies ASMT-FJ30-AB000 is a miniature SMT Smooth, Consistent Narrow Radiation Pattern (Surface Mount Technology) dome lamp uses an untint- 18 View Angle ed, non-diffused lens to provide a high luminous inten - 3.2 L x 2.4 X 2.4H mm Package Dimension sity within a narrow radiation pattern. The device envi- ronmental friendly green product of unique PCB based, Good Intensity Output namely Miniature Surface Mount AF LED. Compatible with 2x Solder Reflow This lamp type LED utilizes Aluminum Indium Gallium Clear, Non-diffused Epoxy Phosphide (AlInGaP) material technology. The AlInGaP material has a very high luminous efficiency, capable of Applications producing high light output over a wide range of drive currents. The color available for this SMT Lamp package is Camera 612nm Orange. This narrow angle SMT lamp package is designed for ap- Eye Safety plications that require long distance illumination and nar- These orange Miniature Surface Mount AF Lamps are use row beam pattern such as auxiliary flash for auto-focus for camera application. The LEDs have lenses, which fo- function in digital still camera etc. This miniature package cus the beam at about 10mm from the front of the lens, is suitable for applications that have constraint in design from where the beam diverges relatively slowly. If the area. In order to facilitate pick and place operation, this LEDs were placed in a product, they would create a Class 1 SMT Lamp is shipped in tape and reel, with 1500 units per LED to IEC/EN 60825-1 (2001) at the recommended input reel. current. As long as no collimating optics are added to the This package is compatible with Pb-free reflow soldering optical path. process. CAUTION: ASMT-FJ30 LEDs are Class 1A ESD sensitive per JESD22-A114C.01 standard. Please observe appro- priate precautions during handling and processing. Refer to Application Note AN-1142 for additional details. Package Dimensions P.C. BOARD MOLDING 2.40 1.80 BODY (LENS) 1.80 POLARITY 0.55 LED DICE Anode 3.20 MASK SOLDERING 2.20 TERMINAL 0.55 0.50 2.40 1.00 0.55 Notes: 1. All dimensions in millimeters. 2. Tolerance is 0.1mm unless otherwise specified. Device Selection Guide Color Part Number Min. Iv (cd) Test Current (mA) Dice Technology Orange ASMT-FJ30 5.5 20 AlInGaP Notes: 1. The luminous intensity IV is measured at the peak of the spatial radiation pattern which may not be aligned with the mechanical axis of the LED package. 2. Iv Tolerance = 15% Absolute Maximum Ratings at T = 25C A Parameter ASMT-FJ30 Units DC Forward Current 50 mA Power Dissipation 125 mW LED Junction Temperature 95 C Operating Temperature Range -40 to 85 C Storage Temperature Range -40 to 85 C Soldering Temperature refer reflow soldering profile (Figure 6) 2