Reliability Data Sheet ASMT-UWA1, ASMT-UWA2, ASMT-UWB1, ASMT-UWB2 OneWhite Surface Mount PLCC-2 LED Indicator Broadcom tests parts at the absolute maximum rated Description conditions recommended for the device. The actual The following cumulative test results have been obtained performance you obtain from Broadcom parts depends on from testing performed at Broadcom in accordance with the electrical and environmental characteristics of your JEDEC. application but will probably be better than performance outlined in the following table. Table 1: Environmental Tests and Other Tests a b Test Name Reference Test Conditions Units Tested Units Failed Temperature Cycle JESD22-A104 40C/100C, 30 minutes dwell, 5 minute 2632 0 transfer, 100 cycles Low Temperature Operating Life JESD22-A108 T = 40C, I = 30 mA for 1000 hours 84 0 A F High Temperature Operating Life JESD22-A108 T = 55C, I = 30 mA for 1000 hours 280 0 A F Temperature Humidity Operating JESD22-A101 T = 60C/90% RH, I = 23 mA for 1000 hours 728 0 A F Life Room Temperature Operating Life JESD22-A108 T = 25C, I = 30 mA for 1000 hours 84 0 A F Temperature Humidity Storage Life JESD22-A101 T = 60C/90% RH for 1000 hours 392 0 A Low Temperature Storage JESD22-A103 T = 40C for 1000 hours 84 0 A High Temperature Storage JESD22-A103 T =100C for 1000 hours 84 0 A Solderability JESD22-B102 245C for 5 seconds 60 0 Mechanical Shock JESD22-B104 5 shocks each X1, X2, Y1, Y2, Z1, Z2, 2900G, 30 0 0.3-ms pulse Vibration JESD22-B103 4 cycles, 4 minutes each X, Y, and Z at 0.06 in. at 30 0 20 Hz to 100 Hz, 50g at 100 Hz to 2000 Hz Pulse Test JESD22-A108 T = 25C, Frequency = 1 kHz, 1000 hours, 84 0 A Peak current = 100 mA, Duty factor = 10% a. Each reliability sample was subjected to pretreatment of moisture soak followed by reflow accordance to JEDEC standard before stress under reliability test listed in the previous table. b. A failure is any LED that is open, shorted, or fails to emit light (except the solderability test). Broadcom AV02-2961EN March 20, 2020Disclaimer Broadcom s products and software are not specifically designed, manufactured, or authorized for sale as parts, components, or assemblies for the planning, construction, maintenance, or direct operation of a nuclear facility or for use in medical devices or applications. The customer is solely responsible, and waives all rights to make claims against Broadcom or its suppliers, for all loss, damage, expense, or liability in connection with such use. Broadcom, the pulse logo, Connecting everything, Avago Technologies, Avago, and the A logo are among the trademarks of Broadcom and/or its affiliates in the United States, certain other countries, and/or the EU. Copyright 20172020 Broadcom. All Rights Reserved. The term Broadcom refers to Broadcom Inc. and/or its subsidiaries. For more information, please visit www.broadcom.com. Broadcom reserves the right to make changes without further notice to any products or data herein to improve reliability, function, or design. Information furnished by Broadcom is believed to be accurate and reliable. However, Broadcom does not assume any liability arising out of the application or use of this information, nor the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others.