HCNR200 and HCNR201 High-Linearity Analog Optocouplers Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available -xxxE denotes a lead-free product Description Features Low nonlinearity: 0.01% The HCNR200/201 highlinearity analog optocoupler consists of a highper formance AlGaAs LED that illumi K (I /I ) transfer gain 3 PD2 PD1 nates two closely matched photodiodes. The input pho HCNR200: 15% todiode can be used to monitor, and therefore stabilize, HCNR201: 5% the light output of the LED. As a result, the nonlinear ity Low gain temperature coefficient: 65 ppm/C and drift characteristics of the LED can be virtually elimi Wide bandwidth DC to >1 MHz nated. The output photodiode produces a photocur rent Worldwide safety approval that is linearly related to the light output of the LED. The UL 1577 recognized (5 kV rms/1 min rating) close matching of the photo diodes and advanced de CSA approved sign of the package ensure the high linearity and stable IEC/EN/DIN EN 6074752 appr oved gain characteristics of the opto coupler. V = 1414 V (option 050) IORM peak The HCNR200/201 can be used to isolate analog signals Surface mount option available (Option 300) in a wide variety of applications that require good stabil 8P in DIP package 0.400 spacing ity, linearity, bandwidth and low cost. The HCNR200/201 Allows flexible circuit design is very flexible and, by appro priate design of the appli cation circuit, is capable of operating in many different Applications modes, including: unipolar/bipolar , ac/dc and inverting/ Low cost analog isolation nonin verting. The HCNR200/201 is an excellent solution Telecom: Modem, PBX for many analog isola tion problems. Industrial process control: Schematic Transducer isolator Isolator for thermo couples 4 mA to 20 mA loop isola 1 8 tion LED CATHODE NC - SMPS feedback loop, SMPS feedforward V F Monitor motor supply voltage I + F LED ANODE NC Medical 2 7 3 6 PD1 CATHODE PD2 CATHODE I I PD1 PD2 PD1 ANODE PD2 ANODE 4 5 CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD.Ordering Information HCNR200/HCNR201 is UL Recognized with 5000 Vrms for 1 minute per UL1577. Option IEC/EN/DIN EN Part RoHS non RoHS Surface Gull Tape UL 5000 Vrms/ 60747-5-2 Number Compliant Compliant Package Mount Wing & Reel 1 Minute rating V = 1414 V Quantity IORM peak 000E no option 400 mil X 42 per tube 300E 300 Widebody X X X 42 per tube HCNR200 500E 500 DIP8 X X X X 750 per reel HCNR201 050E 050 X X 42 per tube 350E 350 X X X X 42 per tube 550E 550 X X X X X 750 per reel To order, choose a part number from the part number column and combine with the desired option from the option column to form an order entry. Example 1: HCNR200550E to order product of Gull Wing Surface Mount package in Tape and Reel packaging with IEC/EN/ DIN EN 6074752 V = 1414 V Safety Approval and UL 5000 Vrms for 1 minute rating and RoHS compliant. IORM peak Example 2: HCNR201 to order product of 8Pin Widebody DIP package in Tube packaging with UL 5000 Vrms for 1 minute rating and non RoHS compliant. Option datasheets are available. Contact your Avago sales representative or authorized distributor for information. Remarks: The notation XXX is used for existing products, while (new) products launched since July 15, 2001 and RoHS compliant will use XXXE. 2