Data Sheet 6N137, HCNW137, HCNW2601, HCNW2611, HCPL-0600, HCPL-0601, HCPL-0611, HCPL-0630, HCPL-0631, HCPL-0661, HCPL-2601, HCPL-2611, HCPL-2630, HCPL-2631, HCPL-4661 High CMR, High Speed TTL Compatible Optocouplers Description Features 15 kV/s minimum Common Mode Rejection (CMR) at The Broadcom 6N137, HCPL-26xx/06xx/4661, V = 1 kV for HCNW2611, HCPL-2611, HCPL-4661, HCNW137/26x1 are optically coupled gates that combine a CM HCPL-0611, HCPL-0661 GaAsP light emitting diode and an integrated high gain High speed: 10 MBd typical photo detector. An enable input allows the detector to be LSTTL/TTL compatible strobed. The output of the detector IC is an open collector Low input current capability: 5 mA Schottky-clamped transistor. The internal shield provides a guaranteed common mode transient immunity specification Guaranteed AC and DC performance over temperature: 40C to +85C up to 15,000 V/s at Vcm = 1000V. Available in 8-Pin DIP, SOIC-8, widebody packages This unique design provides maximum AC and DC circuit Strobable output (single channel products only) isolation while achieving TTL compatibility. The optocoupler Safety approval AC and DC operational parameters are guaranteed from UL recognized 3750 V for 1 minute and rms 40C to +85C allowing troublefree system performance. 5000 V for 1 minute per UL1577 CSA approved rms (5000 V /1 Minute rating is for HCNW137/26X1 rms Functional Diagram and Option 020 6N137, HCPL-2601/11/30/31, HCPL-4661 products only) 6N137, HCPL-2601/2611 HCPL-2630/2631/4661 HCPL-0600/0601/0611 HCPL-0630/0631/0661 IEC/EN/DIN EN 60747-5-5 approved with: NC 1 8 V ANODE 1 1 8 V CC CC V = 567 V for 06xx Option 060 IORM peak V ANODE 2 7 V CATHODE 1 2 7 E O1 V = 630 V for 6N137/26xx Option 060 IORM peak V V CATHODE 3 6 CATHODE 2 3 6 O O2 V =1414 V for HCNW137/26x1 IORM peak NC 4 5 GND ANODE 2 4 5 GND MIL-PRF-38534 hermetic version available (HCPL- SHIELD SHIELD 56xx/66xx) TRUTH TABLE TRUTH TABLE (POSITIVE LOGIC) (POSITIVE LOGIC) Applications LED ENABLE OUTPUT LED OUTPUT ON H L ON L Isolated line receiver OFF H H OFF H ON L H Computer-peripheral interfaces OFF L H Microprocessor system interfaces ON NC L OFF NC H Digital isolation for A/D, D/A conversion Switching power supply NOTE: A 0.1-F bypass capacitor must be connected as Instrument input/output isolation close as possible between pins 5 and 8. Ground loop elimination Pulse transformer replacement CAUTION Take normal static precautions in handling and assembly of this component to prevent damage Power transistor isolation in motor drives and/or degradation that may be induced by ESD. Isolation of high speed logic systems Broadcom AV02-0940EN March 23, 20186N137, HCNW137, HCNW2601, HCNW2611, HCPL-0600, HCPL-0601, HCPL- 0611, HCPL-0630, HCPL-0631, HCPL-0661, HCPL-2601, HCPL-2611, HCPL- 2630, HCPL-2631, HCPL-4661 Data Sheet High CMR, High Speed TTL Compatible Optocouplers The 6N137, HCPL-26xx, HCPL-06xx, HCPL-4661, HCNW137, and HCNW26x1 are suitable for high speed logic interfacing, input/output buffering, as line receivers in environments that conventional line receivers cannot tolerate and are recommended for use in extremely high ground or induced noise environments. Selection Guide Widebody Minimum CMR 8-Pin DIP (300 Mil) Small-Outline SO-8 (400 Mil) Hermetic Input On- Single Single Single Single and dV/dt Current Output Channel Dual Channel Channel Dual Channel Channel Dual Channel V (V) (V/s) (mA) Enable Package Package Package Package Package Packages CM 1000 10 5 YES 6N137 5,000 1,000 5 YES HCPL-0600 HCNW137 NO HCPL-2630 HCPL-0630 10,000 1,000 YES HCPL-2601 HCPL-0601 HCNW2601 NO HCPL-2631 HCPL-0631 15,000 1,000 YES HCPL-2611 HCPL-0611 HCNW2611 NO HCPL-4661 HCPL-0661 a 1,000 50 YES HCPL-2602 a 3,500 300 YES HCPL-2612 a a 1,000 50 3 YES HCPL-261A HCPL-061A a a NO HCPL-263A HCPL-063A b a a 1,000 YES 1,000 HCPL-261N HCPL-061N a a NO HCPL-263N HCPL-063N c a 1,000 50 12.5 HCPL-193x a HCPL-56xx a HCPL-66xx a. Technical data are on separate Broadcom publications. b. 15 kV/s with V = 1 kV can be achieved using Broadcom application circuit.3. CM c. Enable is available for single channel products only, except for HCPL-193x devices. Ordering Information HCPL-xxxx is UL Recognized with 3750 V for 1 minute per UL1577. rms HCNWxxxx is UL Recognized with 5000 V for 1 minute per UL1577. rms Broadcom AV02-0940EN 2