HCPL-0708 High Speed CMOS Optocoupler Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available -xxxE denotes a lead-free product Description Features Available in SO-8 package, the HCPL-0708 optocoupler +5 V CMOS compatibility utilizes the latest CMOS IC technology to achieve out- 15 ns typical pulse width distortion standing performance with very low power consump- 30 ns max. pulse width distortion tion. Basic building blocks of the HCPL-0708 are a high 40 ns max. propagation delay skew speed LED and a CMOS detector IC. The detector incor- porates an integrated photodiode, a high-speed trans- High speed: 15 MBd impedance amplifier, and a voltage comparator with an 60 ns max. propagation delay output driver. 10 kV/s minimum common mode rejection 40 to 100C temperature range Functional Diagram Safety and regulatory approvals pending UL recognized 3750 V rms for 1 min. per UL 1577 for HCPL-0708 NC 1 8 V CSA component acceptance Notice 5 DD IEC/EN/DIN EN 60747-5-2 approved for HCPL-0708 Option 060 ANODE 2 7 NC CATHODE 3 6 V O Applications Scan drive in PDP NC 4 5 GND Digital field bus isolation: DeviceNet, SDS, Profibus Multiplexed data transmission TRUTH TABLE Computer peripheral interface LED V , OUTPUT O Microprocessor system interface OFF H ON L *A 0.1 F bypass capacitor must be connected between pins 5 and 8. HCPL-0710 Functional Diagram CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD. Ordering Information HCPL-0708 is UL Recognized with 3750 Vrms for 1 minute per UL1577. Option Part RoHS non RoHS Surface Gull Tape UL 5000 Vrms/ IEC/EN/DIN Number Compliant Compliant Package Mount Wing & Reel 1 Minute rating EN 60747-5-2 Quantity -000E no option SO-8 X 100 per tube HCPL-0708 -500E 500 X X 1500 per reel -560E - X X X 1500 per reel To order, choose a part number from the part number column and combine with the desired option from the option column to form an order entry. Example1: HCPL-0708-500E to order product of Small Outline SO-8 package in Tape and Reel packaging and RoHS compliant. Example 2: HCPL-0708 to order product of Small Outline SO-8 package in Tube packaging and non RoHS compliant. Option datasheets are available. Contact your Avago sales representative or authorized distributor for information. Remarks: The notation XXX is used for existing products, while (new) products launched since July 15, 2001 and RoHS compliant will use XXXE.