Data Sheet HCPL-2201, HCPL-2202, HCPL-2211, HCPL-2212, HCPL-2231, HCPL-2232, HCPL-0201, HCPL-0211, HCNW2201, HCNW2211 Very High CMR, Wide V Logic Gate CC Optocouplers Description Features The Broadcom HCPL-22XX, HCPL-02XX, and 10 kV/s minimum Common Mode Rejection (CMR) at V = 1000V (HCPL-2211/2212/0211/2232, HCNW22XX are optically coupled logic gates. The CM HCNW2211) HCPL22XX and HCPL-02XX contain a GaAsP LED while Wide operating V range: 4.5V to 20V the HCNW22XX contains an AlGaAs LED. The detectors CC have totem pole output stages and optical receiver input 300 ns propagation delay guaranteed over the full temperature range stages with built-in Schmitt triggers to provide logic- compatible waveforms, eliminating the need for additional 5 Mbd typical signal rate waveshaping. Low input current (1.6 mA to 1.8 mA) Hysteresis A superior internal shield on the HCPL-2211/12, HCPL- Totem pole output (no pull-up resistor required) 0211, HCPL-2232, and HCNW2211 guarantees common Available in 8-pin DIP, SOIC-8, wide body packages mode transient immunity of 10 kV/s at a common mode Guaranteed performance from 40C to +85C voltage of 1000V. Safety approval UL recognized 3750 V for 1 minute (5000 V rms rms for 1 minute for HCNW22XX) per UL1577 CSA approved IEC/EN/DIN EN 60747-5-5 approved with CAUTION It is advised that normal static precautions be V =630 V (HCPL-2211/2212 Option 060 taken in handling and assembly of this IORM peak only) and V = 1414 V (HCNW22XX only) IORM peak component to prevent damage and/or MIL-PRF-38534 hermetic version available degradation which may be induced by ESD. (HCPL-52XX/62XX) The components featured in this data sheet are not to be used in military or aerospace Applications applications or environments. Isolation of high-speed logic systems Computer-peripheral interfaces Microprocessor system interfaces Ground loop elimination Pulse transformer replacement High-speed line receiver Power control systems Broadcom AV02-0674EN September 6, 2019HCPL-2201, HCPL-2202, HCPL-2211, HCPL-2212, HCPL-2231, HCPL-2232, Very High CMR, Wide V Logic Gate Optocouplers HCPL-0201, HCPL-0211, HCNW2201, HCNW2211 Data Sheet CC Functional Diagram HCPL-2201/11 HCPL-0201/11 HCNW2201/11 HCPL-2202/12 NC 1 8 V NC 1 8 V CC CC V ANODE 2 7 ANODE 2 7 NC O 6 NC 6 V CATHODE 3 CATHODE 3 O 4 5 4 5 NC GND NC GND SHIELD SHIELD HCPL-2231/32 ANODE 1 1 8 V CC TRUTH TABLE (POSITIVE LOGIC) V LED V 2 7 CATHODE 1 O O1 ON HIGH OFF LOW 6 V CATHODE 2 3 O2 4 5 ANODE 2 GND SHIELD NOTE: A 0.1 F bypass capacitor must be connected between pins 5 and 8. The electrical and switching characteristics of the HCPL-22XX, HCPL-02XX and HCNW22XX are guaranteed from 40C to +85C and a V from 4.5V to 20V. Low I and wide V range allow compatibility with TTL, LSTTL, and CMOS logic and CC F CC result in lower power consumption compared to other high-speed couplers. Logic signals are transmitted with a typical propagation delay of 150 ns. Broadcom AV02-0674EN 2