HCPL-2503 Broadcom

HCPL-2503 Single Channel, High Speed Logic Interface Optocoupler Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available -xxxE denotes a lead-free product Description Features The HCPL-2503 optocoupler is specified for use in LSTTL- Datar ates to 250 kb/sNRZ to-LSTTL and TTL-to-LSTTL logic interfaces. A nominal LSTTLc ompatible 8 mA sink current through the input LED will provide High commonmode tr ansient immunity: enough output current for proper operation of 1 LSTTL > 1000 V/s gate under worst-case conditions when used in the rec- ommended circuits. The CTR of the HCPL-2503 is 15% 3750 Vdcwithstand t estv oltage minimuma tI =8 mA. F Open collector output The HCPL-2503 contains a light emitting diode and an in- Guaranteed performance from temperature: 0 C to tegrated photon detector with a 3000 Vdc withstand test 70C between input and output. Separate connection for the Safety approval photodiode bias and output transistor collector reduce - UL Recognized - 3750Vrms for 1min (5000Vrms for the base-collector capacitance, giving improved speed 1min Option 020 devices) per UL1577. compared with conventional phototransistor couplers. - IEC/EN/DIN EN 60747-5-2 Approved Schematic - VIORM = 630 Vpeak for option 060 I CC 8 V Applications CC Highspeed logicg round isolation I F 2 LST TL-to-LSTTL and TTL-to-LSTTL ANODE + High voltage isolation V F I O 6 Analogsig nal ground isolation - V O CATHODE 3 5 SHIELD GND I B 7 * V B -A 0.1uF bypasscapacit ormust bec onnectedbet ween5 and 8. CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD.Outline Drawing 8-Pin DIP Package 7.62 0.25 9.65 0.25 (0.300 0.010) (0.380 0.010) 8 7 6 5 6.35 0.25 TYPE NUMBER OPTION CODE* (0.250 0.010) DATE CODE A XXXXZ YYWW UL 1 2 3 4 RECOGNITION 1.78 (0.070) MAX. 1.19 (0.047) MAX. + 0.076 0.254 5 TYP. - 0.051 + 0.003) 3.56 0.13 4.70 (0.185) MAX. (0.010 - 0.002) (0.140 0.005) 0.51 (0.020) MIN. 2.92 (0.115) MIN. DIMENSIONS IN MILLIMETERS AND (INCHES). 1.080 0.320 0.65 (0.025) MAX. (0.043 0.013) *MARKING CODE LETTER FOR OPTION NUMBERS 2.54 0.25 = OPTION 020 (0.100 0.010) = OPTION 060 OPTION NUMBERS 300 AND 500 NOT MARKED. NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX. 8-Pin DIP Package with Gull Wing Surface Mount Option 300 LAND PATTERN RECOMMENDATION 9.65 0.25 1.016 (0.040) (0.380 0.010) 8 7 6 5 6.350 0.25 10.9 (0.430) (0.250 0.010) 1 2 3 4 2.0 (0.080) 1.27 (0.050) 1.780 9.65 0.25 (0.070) (0.380 0.010) 1.19 MAX. 7.62 0.25 (0.047) (0.300 0.010) MAX. + 0.076 0.254 - 0.051 3.56 0.13 + 0.003) (0.140 0.005) (0.010 - 0.002) 1.080 0.320 0.635 0.25 (0.043 0.013) (0.025 0.010) 12 NOM. 0.635 0.130 2.54 (0.025 0.005) (0.100) BSC DIMENSIONS IN MILLIMETERS (INCHES). LEAD COPLANARITY = 0.10 mm (0.004 INCHES). NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX. 2 UR