HCPL-260L/060L/263L/063L
High Speed LVTTL Compatible 3.3 V Optocouplers
Data Sheet
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
Description Features
The HCPL-260L/060L/263L/063L are optically coupled 3.3V/5V Dual Supply Voltages
gates that combine a GaAsP light emitting diode and
Low power consumption
an integrated high gain photo detector. An enable in-
15 kV/s minimum Common Mode Rejection (CMR) at
put allows the detector to be strobed. The output of
V = 1000 V
CM
the detector IC is an open collector Schottky-clamped
transistor. The internal shield provides a guaranteed High speed: 15 MBd typical
common mode transient immunity specification of
LVTTL/LVCMOS compatible
15 kV/s at 3.3V.
Low input current capability: 5 mA
This unique design provides maximum AC and DC circuit
Guaranteed AC and DC performance over tempera-
isolation while achieving LVTTL/LVCMOS compati-bili-
ture: 40 C to +85 C
ty. The optocoupler AC and DC operational parameters
Available in 8-pin DIP, SOIC-8
are guaranteed from 40 C to +85 C allowing trouble-
free system performance.
Strobable output (single channel products only)
These optocouplers are suitable for high speed logic Safety approvals: UL, CSA, IEC/EN/DIN EN 60747-5-5
interfacing, input/output buffering, as line receivers in
environments that conventional line receivers cannot
Applications
tolerate and are recommended for use in extremely high
ground or induced noise environments. Isolated line receiver
Computer-peripheral interfaces
Functional Diagram
Microprocessor system interfaces
HCPL-260L/060L HCPL-263L/063L
1 V ANODE 1 1 V Digital isolation for A/D, D/A conversion
NC 8 8
CC CC
Switching power supply
ANODE CATHODE 1 V
2 7 V 2 7
O1
E
Instrument input/output isolation
CATHODE CATHODE 2
3 6 V 3 6 V
O O2
Ground loop elimination
4 5 GND ANODE 2 4 5 GND
NC
SHIELD SHIELD
Pulse transformer replacement
Truth Table Truth Table
Field buses
(Positive Logic) (Positive Logic)
LED Enable Output LED Output
ON H L ON L
OFF H H OFF H
ON L H
OFF L H
ON NC L
OFF NC H
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.Ordering Information
HCPL-xxxx is UL Recognized with 3750 Vrms for 1 minute per UL1577
Option
UL 5000
RoHS Non RoHS Gull Tape
Surface Vrms/ 1 Min- IEC/EN/DIN
Part number Compliant Compliant Package Mount Wing & Reel ute rating EN 60747-5-5 Quantity
-000E No option 50 per tube
-300E -300 X X 50 per tube
-500E #500 X X X 1000 per reel
-020E -020 X 50 per tube
300mil
HCPL-260L
DIP-8
-320E -320 X X X 50 per tube
-520E -520 X X X X 1000 per reel
-060E #060 X 50 per tube
-560E #560 X X X X 1000 per reel
-000E No option 50 per tube
-300E #300 X X 50 per tube
-500E #500 X X X 1000 per reel
-020E #020 X 50 per tube
300mil
HCPL-263L
DIP-8
-320E -320 X X X 50 per tube
-520E #520 X X X X 1000 per reel
-060E -060 X 50 per tube
-560E -560 X X X X 1000 per reel
-000E No option X 100 per tube
-500E #500 X X 1500 per reel
HCPL-060L SO-8
-060E #060 X X 100 per tube
-560E -560 X X X 1500 per reel
-000E No option X 100 per tube
-500E #500 X X 1500 per reel
HCPL-063L SO-8
-060E -060 X X 100 per tube
-560E -560 X X X 1500 per reel
To order, choose a part number from the part number column and combine with the desired option from the option
column to form an order entry. Combination of Option 020 and Option 060 is not available.
Example 1:
HCPL-260L-560E to order product of 300mil DIP Gull Wing Surface Mount package in Tape and Reel packaging with
IEC/EN/DIN EN 60747-5-5 Safety Approval in RoHS compliant.
Example 2:
HCPL-263L to order product of 300mil DIP package in tube packaging and non RoHS compliant.
Option datasheets are available. Contact your Avago sales representative or authorized distributor for information.
Remarks: The notation #XXX is used for existing products, while (new) products launched since 15th July 2001 and
RoHS compliant option will use -XXXE.
2