HCPL-3140-060E Broadcom

Data Sheet HCPL-3140, HCPL-0314 0.4-Amp Output Current IGBT Gate Drive Optocoupler Description Features 0.4A minimum peak output current The HCPL-3140/HCPL-0314 family of devices consists of a High-speed response: GaAsP LED optically coupled to an integrated circuit with a 0.7-s maximum propagation delay over temperature power output stage. These optocouplers are ideally suited range for driving power IGBTs and MOSFETs used in motor Ultra-high CMR: minimum 25 kV/s at V = 1 kV CM control inverter applications. The high operating voltage Bootstrappable supply current: maximum 3 mA range of the output stage provides the drive voltages Wide operating temperature range: 40C to 100C required by gate controlled devices. The voltage and current Wide V operating range: 10V to 30V over CC supplied by this optocoupler make it ideally suited for temperature range directly driving small or medium power IGBTs. For IGBTs Available in DIP-8 and SO-8 packages with higher ratings, the HCPL-3150 (0.5A) or HCPL-3120 Safety approvals: UL approval, 3750 V for 1 minute. rms (2.0A) optocouplers can be used. CSA approval. IEC/EN/DIN EN 60747-5-2 approval V = 630 V (HCPL-3140) Figure 1: Functional Diagram IORM peak Applications N/C 1 8 V CC Isolated IGBT/Power MOSFET gate drive AC and brushless DC motor drives ANODE 2 7 N.C. Inverters for home appliances CATHODE 3 6 V O Industrial inverters Switch Mode Power Supplies (SMPS) N/C 4 5 V EE SHIELD CAUTION It is advised that normal static precautions be HCPL-3140/HCPL-0314 taken in handling and assembly of this component to prevent damage and/or Table 1: Truth Table degradation that may be induced by ESD. V LED O OFF LOW ON HIGH A 0.1-F bypass capacitor must be connected between pins V and V . CC EE Broadcom AV02-0162EN May 28, 2021HCPL-3140, HCPL-0314 Data Sheet 0.4-Amp Output Current IGBT Gate Drive Optocoupler Ordering Information HCPL-3140 and HCPL-0314 are UL recognized with 3750 V for 1 minute per UL1577. rms Option RoHS Non RoHS Surface Gull Tape & IEC/EN/DIN Part Number Compliant Compliant Package Mount Wing Reel EN 60747-5-2 Quantity -000E No option 50 per tube -300E 300 X X 50 per tube -500E 500 X X X 1000 per reel 300 mil HCPL-3140 DIP-8 -060E 060 X 50 per tube -360E 360 X X X 50 per tube -560E 560 X X X X 1000 per reel -000E No option X 100 per tube -500E 500 X X 1500 per reel HCPL-0314 SO-8 -060E 060 X X 100 per tube -560E 560 X X X 1500 per reel To order, choose a part number from the Part Number column and combine with the desired option from the Option column to form an order entry. Example 1: HCPL-3140-560E to order product of 300 mil DIP Gull Wing Surface Mount package in Tape and Reel packaging with IEC/EN/DIN EN 60747-5-2 Safety Approval in RoHS compliant. Example 2: HCPL-3140 to order product of 300 mil DIP package in tube packaging and non RoHS compliant. Option data sheets are available. Contact your Broadcom sales representative or authorized distributor for information. Remarks: The notation XXX is used for existing products, while (new) products launched since 15th July 2001 and RoHS compliant option will use -XXXE . Broadcom AV02-0162EN 2