HCPL-4562 and HCNW4562 High Bandwidth, Analog/Video Optocouplers Data Sheet Description Features 1 The HCPL-4562 and HCNW4562 optocouplers provide Wide bandwidth : wide-bandwidth isolation for analog signals. They are ideal for 17 MHz (HCPL-4562) video isolation when combined with their application circuit 9 MHz (HCNW4562) (Figure 4). High linearity and low phase shift are achieved 1 High voltage gain : through an AlGaAs LED combined with a high-speed detector. 2.0 (HCPL-4562) These single-channel optocouplers are available in 8-pin DIP 3.0 (HCNW4562) and wide-body package configurations. Low GV temperature coefficient: 0.3 %/C Highly linear at low drive currents Functional Diagram High-speed AlGaAs emitter Safety approval: 8 NC 1 V CC UL Recognized: 3750V for 1 minute (5000V for RMS RMS 1 minute for HCPL-4562 020 and HCNW4562) per UL 1577 7 ANODE 2 V B CSA Approved IEC/EN/DIN EN 60747-5-5 Approved: V = IORM 6 CATHODE 3 V O 1414V for HCNW4562 peak Available in 8-pin DIP and wide-body packages NC 4 5 GND CAUTION It is advised that normal static precautions be taken in the handling and assembly of this component to prevent damage and/or Applications degradation which may be induced by ESD. The components featured in this data sheet are not Video isolation for the following standards/formats: NTSC, to be used in military or aerospace applications PAL, SECAM, S-VHS, ANALOG RGB or environments. Low drive current feedback element in switching power supplies (for ISDN networks, as an example) A/D converter signal isolation Analog signal ground isolation High-voltage insulation Broadcom - 1 -HCPL-4562 and HCNW4562 Data Sheet Selection Guide Single-Channel Packages 8-Pin DIP (300 mil) Wide-Body (400 mil) HCPL-4562 HCNW4562 Ordering Information HCPL-4562 is UL Recognized with 3750V for 1 minute per UL1577 unless otherwise specified. HCNW4562 is UL Recognized with RMS 5000V for 1 minute per UL1577. RMS Option UL 5000V / Surface Gull Tape and IEC/EN/DIN RMS Part Number Package Quantity RoHS Non-RoHS Mount Wing Reel EN 60747-5-5 1 Minute Rating Compliant Compliant -000E no option 50 per tube -300E 300 X X 50 per tube -500E 500 X X X 1000 per reel -020E 020 X 50 per tube HCPL-4562 300 mil DIP-8 -320E 320 X X X 50 per tube -520E 520 X X X X 1000 per reel a -060E 060 50 per tube X b -000E no option X 42 per tube X 400 mil b -300E 300 X X X 42 per tube HCNW-4562 wide-body X DIP-8 b -500E 500 X X X X 750 per reel X a. IEC/EN/DIN EN 60747-5-5 V = 630V Safety Approval. IORM peak b. IEC/EN/DIN EN 60747-5-5 V = 1414V Safety Approval. IORM peak To order, choose a part number from the part number column and combine with the desired option from the option column to form an order entry. Example 1: HCPL-4562-520E to order product of Gull Wing Surface Mount package in Tape and Reel packaging with UL 5000V /1 RMS minute rating and RoHS compliant. Example 2: HCNW4562 to order product of 8-Pin Wide-body DIP package in Tube packaging with IEC/EN/DIN EN 60747-5-5 V = IORM 1414V Safety Approval and UL 5000V /1 minute rating and non RoHS compliant. peak RMS Option data sheets are available. Contact your Broadcom sales representative or authorized distributor for information. Remarks: The notation XXX is used for existing products, while (new) products launched since July 15, 2001 and RoHS compliant will use XXXE. Broadcom - 2 -