6N137, HCNW137, HCNW2601, HCNW2611, HCPL-0600, HCPL-0601, HCPL-0611, HCPL-0630, HCPL-0631, HCPL-0661, HCPL-2601, HCPL-2611, HCPL-2630, HCPL-2631, HCPL-4661 High CMR, High Speed TTL Compatible Optocouplers Data Sheet Description Features 15 kV/s minimum Common Mode Rejection (CMR) at The 6N137, HCPL-26xx/06xx/4661, HCNW137/26x1 are VCM= 1 kV for HCNW2611, HCPL-2611, HCPL-4661, optically coupled gates that combine a GaAsP light emitting HCPL-0611, HCPL-0661 diode and an integrated high gain photo detector. An enable High speed: 10 MBd typical input allows the detector to be strobed. The output of the detector IC is an open collector Schottky-clamped transistor. LSTTL/TTL compatible The internal shield provides a guaranteed common mode Low input current capability: 5 mA transient immunity specification up to 15,000 V/s at Vcm = Guaranteed AC and DC performance over temperature: 1000 V. 40 C to +85 C This unique design provides maximum AC and DC circuit Available in 8-Pin DIP, SOIC-8, widebody packages isolation while achieving TTL compatibility. The optocoupler Strobable output (single channel products only) AC and DC operational parameters are guaranteed from 40 C Safety approval to +85 C allowing troublefree system performance. UL recognized - 3750 V for 1 minute and 5000 V rms rms for 1 minute per UL1577 CSA approved (5000 V /1 rms Minute rating is for HCNW137/26X1 and Option 020 Functional Diagram 6N137, HCPL-2601/11/30/31, HCPL-4661 products 6N137, HCPL-2601/2611 HCPL-2630/2631/4661 only) HCPL-0600/0601/0611 HCPL-0630/0631/0661 IEC/EN/DIN EN 60747-5-5 approved with 1 V ANODE 1 1 V NC 8 CC 8 CC V = 567 V for 06xx Option 060 IORM peak ANODE CATHODE 1 V 2 7 V 2 7 O1 E V = 630 V for 6N137/26xx Option 060 IORM peak CATHODE 3 6 V CATHODE 2 3 6 V O O2 V =1414 V for HCNW137/26x1 IORM peak 4 5 GND ANODE 2 4 5 GND NC SHIELD SHIELD MIL-PRF-38534 hermetic version available (HCPL-56xx/66xx) TRUTH TABLE TRUTH TABLE (POSITIVE LOGIC) (POSITIVE LOGIC) LED ENABLE OUTPUT LED OUTPUT Applications ON H L ON L OFF H H OFF H Isolated line receiver ON L H Computer-peripheral interfaces OFF L H ON NC L Microprocessor system interfaces OFF NC H Digital isolation for A/D, D/A conversion Switching power supply A 0.1 F bypass capacitor must be connected between pins 5 Instrument input/output isolation and 8. Ground loop elimination CAUTION It is advised that normal static precautions be Pulse transformer replacement taken in handling and assembly of this Power transistor isolation in motor drives component to prevent damage and/or Isolation of high speed logic systems degradation which may be induced by ESD. Avago Technologies - 1 -6N137, HCNW137, HCNW2601, HCNW2611, HCPL-0600, HCPL-0601, HCPL-0611, Selection Guide HCPL-0630, HCPL-0631, HCPL-0661, HCPL-2601, HCPL-2611, HCPL-2630, HCPL-2631, HCPL-4661 Data Sheet The 6N137, HCPL-26xx, HCPL-06xx, HCPL-4661, HCNW137, and HCNW26x1 are suitable for high speed logic interfacing, input/output buffering, as line receivers in environments that conventional line receivers cannot tolerate and are recommended for use in extremely high ground or induced noise environments. Selection Guide Small-Outline SO-8 Widebody Minimum CMR 8-Pin DIP (300 Mil) Hermetic (400 Mil) Input On- Output Current Single Single Single Single and Enable dV/dt Dual Channel Dual Channel (mA) V (V) Channel Channel Channel Dual Channel CM (V/s) Package Package Package Package Package Packages 1000 10 5 YES 6N137 5,000 1,000 5 YES HCPL-0600 HCNW137 NO HCPL-2630 HCPL-0630 10,000 1,000 YES HCPL-2601 HCPL-0601 HCNW2601 NO HCPL-2631 HCPL-0631 15,000 1,000 YES HCPL-2611 HCPL-0611 HCNW2611 NO HCPL-4661 HCPL-0661 a 1,000 50 YES HCPL-2602 a 3, 500 300 YES HCPL-2612 a a 1,000 50 3 YES HCPL-261A HCPL-061A a a NO HCPL-263A HCPL-063A b a a 1,000 YES 1,000 HCPL-261N HCPL-061N a a NO HCPL-263N HCPL-063N c a 1,000 50 12.5 HCPL-193x a HCPL-56xx a HCPL-66xx a. Technical data are on separate Avago publications. b. 15 kV/s with V = 1 kV can be achieved using Avago application circuit.3 CM c. Enable is available for single channel products only, except for HCPL-193x devices. Ordering Information HCPL-xxxx is UL Recognized with 3750 V for 1 minute per UL1577. rms HCNWxxxx is UL Recognized with 5000 V for 1 minute per UL1577. rms Avago Technologies - 2 -