HCPL-4701-500E Broadcom

HCPL-4701/-4731/-070A/-073A Very Low Power Consumption High Gain Optocouplers Data Sheet Features Applications Ultra low input current capability - 40 A Battery operated applications Specified for 3 V operation ISDN telephone interface Typical power consumption: <1 mW Ground isolation between logic families TTL, LSTTL, Input power: <50 W CMOS, HCMOS, HL-CMOS, LV-HCMOS Output power: <500 W Low input current line receiver Will operate with V as low as 1.6 V CC EIA RS-232C line receiver High current transfer ratio: 3500% at I = 40 A F Telephone ring detector TTL and CMOS compatible output AC line voltage status indicator low input power Specified ac and dc performance over temperature: dissipation 0C to 70C Low power systems ground isolation Safety approval: Portable system I/O interface UL recognized 3750 V rms for 1 minute and 5000 V rms* for 1 minute per UL1577 CSA approved IEC/EN/DIN EN 60747-5-2 approved with V = 630 V peak IORM (Option 060) for HCPL-4701 8-pin product compatible with 6N138/6N139 and HCPL-2730/HCPL-2731 Available in 8-Pin DIP and SOIC-8 footprint Through hole and surface mount assembly available Functional Diagram HCPL-4701/070A HCPL-4731/073A NC 1 8 V ANODE 1 8 V CC CC 1 2 7 2 7 V ANODE V CATHODE 1 O1 B 3 6 CATHODE 3 6 V CATHODE V 2 O2 O NC 4 5 GND ANODE 4 5 GND 2 TRUTH TABLE LED V O ON LOW OFF HIGH *5000 V rms/1 Minute rating is for Option 020 (HCPL-4701 and HCPL-4731) products only. A 0.1 F bypass capacitor connected between pins 8 and 5 is recommended. CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD.Description These devices are very low power consumption, high These devices are designed for use in CMOS, LSTTL gain single and dual channel optocouplers. The or other low power applications. They are especially HCPL-4701 represents the single channel 8-Pin DIP well suited for ISDN telephone interface and battery configuration and is pin compatible with the industry operated applications due to the low power standard 6N139. The HCPL-4731 represents the dual consumption. A 700% minimum current transfer ratio channel 8-Pin DIP configuration and is pin is guaranteed from 0C to 70C operating temperature compatible with the popular standard HCPL-2731. range at 40 A of LED current and V 3V. CC The HCPL-070A and HCPL-073A are the equivalent single and dual channel products in an SO-8 footprint. The SO-8 does not require through holes in a PCB. Each channel can be driven with an input current as This package occupies approximately one-third the low as 40 A and has a typical current transfer ratio of footprint area of the standard dual-in-line package. 3500%. The lead profile is designed to be compatible with standard surface mount processes. These high gain couplers use an AlGaAs LED and an integrated high gain photodetector to provide an extremely high current transfer ratio between input and output. Separate pins for the photodiode and output stage results in TTL compatible saturation voltages and high speed operation. Where desired, the V and V terminals may be tied together to achieve CC O conventional Darlington operation (single channel package only). Selection Guide Widebody 8-Pin DIP Package Hermetic (300 Mil) Small Outline SO-8 (400 mil) Single and Dual Single Dual Minimum Absolute Dual Single Channel Channel Channel Single Input ON Maxi- Channel Channel Package Package Package Channel Current Minimum mum Packages Package HCPL- HCPL- HCPL- Package (I ) CTR V HCPL- F CC 1 1 1 1 1 6N139 2731 0701 0731 HCNW139 0.5 mA 400% 18 V 1 1 1 1 1 6N138 2730 0700 0730 HCNW138 1.6 mA 300% 7 V HCPL-4701 4731 070A 0730A 40 A 800% 18 V 1 0.5 mA 300% 20 V 5701 1 5700 1 5731 1 5730 Notes: 1. Technical data are on separate Avago publication. 2