6N134, 81028, HCPL-563x, HCPL-663x, HCPL-565x, 5962-98001, HCPL-268K, 1 HCPL-665x, 5962-90855, HCPL-560x Hermetically Sealed, High Speed, High CMR, Logic Gate Optocouplers Data Sheet 1. See matrix for available extensions. Description Features These units are single, dual and quad channel, hermetically Dual marked with device part number and DLA Standard sealed optocouplers. The products are capable of operation Microcircuit Drawing (SMD) and storage over the full military temperature range and can Manufactured and tested on a MIL-PRF-38534 Certified be purchased as either commercial product or with full Line MIL-PRF-38534 Class Level H or K testing or from the QML-38534, Class H and K appropriate DLA Drawing. All devices are manufactured and Five hermetically sealed package configurations tested on a MIL-PRF-38534 certified line and Class H and K Performance guaranteed over full military temperature devices are included in the DLA Qualified Manufacturers List range: 55C to +125C QML-38534 for Hybrid Microcircuits. Quad channel devices are High speed: 10 Mbd typical available by special order in the 16-pin DIP through hole packages. CMR: > 10,000 V/s typical 1500 Vdc withstand test voltage CAUTION It is advised that normal static precautions be 2500 Vdc withstand test voltage for HCPL-565x taken in handling and assembly of this High radiation immunity component to prevent damage and/or 6N137, HCPL-2601, HCPL-2630/31 function compatibility degradation which may be induced by ESD. Reliability data TTL circuit compatibility Applications Military and aerospace High reliability systems Transportation, medical, and life critical systems Line receiver Voltage level shifting Isolated input line receiver Isolated output line driver Logic ground isolation Harsh industrial environments Isolation for computer, communication, and test equipment systems Broadcom - 1 -6N134, 81028, HCPL-563x, HCPL-663x, HCPL-565x, 5962-98001, HCPL-268K, HCPL-665x, Functional Diagram 5962-90855, HCPL-560x Data Sheet Each channel contains a GaAsP light emitting diode that is Functional Diagram optically coupled to an integrated high speed photon detector. The output of the detector is an open collector Schottky V CC clamped transistor. Internal shields provide a guaranteed V E common mode transient immunity specification of 1000 V/s. For Isolation Voltage applications requiring up to 2500 Vdc, the V OUT HCPL-5650 family is also available. Package styles for these parts are 8- and 16-pin DIP through hole (case outlines P and E, respectively), and 16-pin surface mount DIP flat pack (case GND outline F), leadless ceramic chip carrier (case outline 2). Devices may be purchased with a variety of lead bend and plating Multiple channel devices available. options. See the Selection Guide table for details. Standard Microcircuit Drawing (SMD) parts are available for each package and lead style. Truth Table (Positive Logic) Because the same electrical die (emitters and detectors) are used for each channel of each device listed in this data sheet, Multichannel Devices absolute maximum ratings, recommended operating conditions, electrical specifications, and performance Input Output characteristics shown in the figures are identical for all parts. On (H) L Occasional exceptions exist due to package variations and Off (L) H limitations, and are as noted. Additionally, the same package assembly processes and materials are used in all devices. These similarities give justification for the use of data obtained from Single Channel DIP one part to represent other parts performance for reliability and certain limited radiation test results. Input Enable Output On (H) H L Off (L) H H On (H) L H Off (L) L H NOTE The connection of a 0.1 F bypass capacitor between V and GND is recommended. CC Broadcom - 2 -