Data Sheet 6N134, 81028, HCPL-563x, HCPL-663x, HCPL-565x, 5962-98001, HCPL-268K, HCPL-665x, 5962-90855, HCPL-560x Hermetically Sealed, High-Speed, High CMR, Logic Gate Optocouplers Description Features These units are single, dual and quad channel, hermetically Dual marked with device part number and DLA Standard Microcircuit Drawing (SMD) sealed optocouplers. The products are capable of operation and storage over the full military temperature range and can Manufactured and tested on a MIL-PRF-38534 Certified Line be purchased as either commercial product or with full MIL- PRF-38534 Class Level H or K testing or from the QML-38534, Class H and K appropriate DLA Drawing. All devices are manufactured Five hermetically sealed package configurations and tested on a MIL-PRF-38534 certified line and Class H Performance guaranteed over full military temperature and K devices are included in the DLA Qualified range: 55C to +125C Manufacturers List QML-38534 for Hybrid Microcircuits. High speed: 10 Mbd typical Quad channel devices are available by special order in the CMR: > 10,000 V/s typical 16-pin DIP through hole packages. 1500 Vdc withstand test voltage 2500 Vdc withstand test voltage for HCPL-565x CAUTION It is advised that normal static precautions be High radiation immunity taken in handling and assembly of this 6N137, HCPL-2601, HCPL-2630/31 function component to prevent damage and/or compatibility degradation which may be induced by ESD. Reliability data TTL circuit compatibility Applications Military and aerospace High reliability systems Transportation, medical, and life critical systems Line receiver Voltage level shifting Isolated input line receiver Isolated output line driver Logic ground isolation Harsh industrial environments Isolation for computer, communication, and test equipment systems Broadcom AV02-1336EN September 16, 20206N134, 81028, HCPL-563x, HCPL-663x, HCPL-565x, 5962-98001, HCPL-268K, Hermetically Sealed, High-Speed, High CMR, HCPL-665x, 5962-90855, HCPL-560x Data Sheet Logic Gate Optocouplers Each channel contains a GaAsP light emitting diode that is Functional Diagram optically coupled to an integrated high speed photon detector. The output of the detector is an open collector V CC Schottky clamped transistor. Internal shields provide a V E guaranteed common mode transient immunity specification V OUT of 1000 V/s. For Isolation Voltage applications requiring up to 2500 Vdc, the HCPL-5650 family is also available. Package styles for these parts are 8- and 16-pin DIP GND through hole (case outlines P and E, respectively), and 16-pin surface mount DIP flat pack (case outline F), leadless Multiple channel devices available. ceramic chip carrier (case outline 2). Devices may be purchased with a variety of lead bend and plating options. See the Selection Guide table for details. Standard Truth Table (Positive Logic) Microcircuit Drawing (SMD) parts are available for each package and lead style. Multichannel Devices Because the same electrical die (emitters and detectors) are used for each channel of each device listed in this data Input Output sheet, absolute maximum ratings, recommended operating On (H) L conditions, electrical specifications, and performance Off (L) H characteristics shown in the figures are identical for all parts. Occasional exceptions exist due to package variations and limitations, and are as noted. Additionally, the same Single Channel DIP package assembly processes and materials are used in all devices. These similarities give justification for the use of Input Enable Output data obtained from one part to represent other parts On (H) H L performance for reliability and certain limited radiation test Off (L) H H results. On (H) L H Off (L) L H NOTE: The connection of a 0.1-F bypass capacitor between V and GND is recommended. CC Broadcom AV02-1336EN 2