HCPL-M600 Broadcom

HCPL-M600, HCPL-M601, HCPL-M611 Small Outline, 5 Lead, High CMR, High Speed, Logic Gate Optocouplers Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available -xxxE denotes a lead-free product Description Features Surface Mountable These small outline high CMR, high speed, logic gate Very Small, Low Prole JEDEC Registered Package opto coup lers are single channel devices in a ve lead Outline miniature foot print. They are electrically equivalent to the following Avago optocouplers (except there is no Compatible with Infrared Vapor Phase Reow and output enable feature): Wave Soldering Processes Internal Shield for High Common Mode Rejection (CMR) SO-5 Package Standard DIP SO-8 Package HCPL-M601: 10,000 V/s at V = 50 V CM HCPL-M600 6N137 HCPL-0600 HCPL-M611: 15,000 V/s at V = 1000 V CM HCPL-M601 HCPL-2601 HCPL-0601 High Speed: 10 Mbd HCPL-M611 HCPL-2611 HCPL-0611 LSTTL/TTL Compatible Low Input Current Capability: 5 mA The SO-5 JEDEC registered (MO-155) package outline Guaranteed ac and dc Performance over Temperature: does not require through holes in a PCB. This package 40C to 85C occupies approximately one fourth the footprint area of Safety and regulatory approvals: the standard dual-in-line package. The lead prole is de- signed to be com patible with standard surface mount - UL recognized: 3750 Vac for 1 min. per U.L. processes. (File No. 55361) - CSA component acceptance Notice 5 The HCPL-M600/01/11 optically coupled gates combine a GaAsP light emitting diode and an integrated high - IEC/EN/DIN EN 60747-5-2 approved for HCPL-M601/ gain photon detector. The output of the detector I.C. M611 Option 060. is an Open-collector Schottky-clamped transistor. The Lead Free Option internal shield provides a guaranteed common mode Applications transient immunity specication of 5,000 V/s for the Isolated Line Receiver HCPL-M601, and 10,000 V/s for the HCPL-M611. Simplex/Multiplex Data Transmission This unique design provides maximum ac and dc circuit Computer-Peripheral Interface isolation while achieving TTL compatibility. The optocou- Microprocessor System Interface pler ac and dc operational param eters are guaranteed from 40C to 85C allowing trouble free system performance. Digital Isolation for A/D, D/A Conversion Switching Power Supply Instrument Input/Output Isolation Ground Loop Elimination Pulse Transformer Replacement CAUTION: The small device geometries inherent to the design of this bipolar component increase the component s suscep ti bility to damage from electrostatic discharge (ESD). It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD.The SO-5 JEDEC registered (MO-155) package outline This unique design provides maximum ac and dc circuit does not require through holes in a PCB. This package isolation while achieving TTL compatibility. The opto- occupies approximately one fourth the footprint area of coupler ac and dc operational param eters are guaran- the standard dual-in-line package. The lead prole is de- teed from -40C to 85C allowing trouble free system signed to be com patible with standard surface mount performance. processes. The HCPL-M600/01/11 are suitable for high speed logic The HCPL-M600/01/11 optically coupled gates combine interfacing, input/output buering, as line receivers in a GaAsP light emitting diode and an integrated high environments that conventional line receivers cannot gain photon detector. The output of the detector I.C. tolerate, and are recommended for use in extremely is an Open-collector Schottky-clamped transistor. The high ground or induced noise environments. internal shield provides a guaranteed common mode transient immunity specication of 5,000 V/s for the HCPL-M601, and 10,000 V/s for the HCPL-M611. Ordering Information HCPL-xxxx is UL Recognized with 3750 Vrms for 1 minute per UL1577. Option Part RoHS Non RoHS Surface Gull Tape& UL 5000 Vrms/ IEC/EN/DIN EN number Compliant Compliant Package Mount Wing Reel 1 Minute rating 60747-5-2 Quantity HCPL-M600 -000E No option X 100 per tube SO-5 -500E 500 X X 1500 per reel HCPL-M601 -000E No option X 100 per tube HCPL-M611 -500E 500 SO-5 X X 1500 per reel -560E - X X X 1500 per reel To order, choose a part number from the part number column and combine with the desired option from the op- tion column to form an order entry. Combination of Option 020 and Option 060 is not available. Example 1: HCPL-M600-500E to order product of Surface Mount SO-5 package in Tape and Reel packaging with RoHS compliant. Example 2: HCPL-M601 to order product of Surface Mount SO-5 package in tube packaging and non RoHS compliant. Option datasheets are available. Contact your Avago sales representative or authorized distributor for information. Remarks: th The notation XXX is used for existing products, while (new) products launched since 15 July 2001 and RoHS compliant option will use -XXXE. 2