HDLx-3416 Series Four Character 6.9 mm (0.27 inch) Smart 5 x 7 Alphanumeric Displays Data Sheet Description Features These are 5 x 7 dot matrix displays with four 0.27 tall char- Smart alphanumeric display acters, driven by an on-board CMOS IC. The IC stores and Built-in RAM, ASCII decoder, and LED drive circuitry decodes 7 bit ASCII data and displays it with an easy to read 5 x 7 Software controlled dimming and blanking font. Multi-plexing circuitry and drivers are included in the IC 128 ASCII character set to allow the display to interface simply with bus-based micro processor systems. End-stackable Categorized for luminous intensity The address and data inputs of the display can be directly Yellow and Green categories for color con nected to the microprocessor address and data buses. Use of like categories yields a uniform display These displays are related to the HDLX-2416 family, and Wide operating temperature range -40C to +85C thus share the same enhancements over the HPDL-2416 segmented displays. These features include support Wave solderable for the full 128 character US ASCII character set, 8 level Wide viewing angle (50 typical) dimming control, external hardware dimming capability, and digit blanking. An extended function disable exists for those designers who desire compatibility with competitive displays. This function disables the dimming and digit blanking controls. Devices: High Effi ciency Red Orange Yellow Green HDLO-3416 HDLA-3416 HDLY-3416 HDLG-3416 ESD WARNING: Standard CMOS handling precautions should be observed to avoid static discharge.Package Dimensions 32.77 0.38 (1.290) (0.015) 8.26 0.25 TYP. (0.325) (0.010) 10.03 (0.395) 10.16 15.24 6.86 (0.400) (0.600) (0.270) 20.07 (0.790) 4.45 PIN 1 IDENTIFIER (0.175) 2.41 TYP. (0.095) PIN NO. FUNCTION PIN NO. FUNCTION 1 NO CONNECT 12 GROUND 8.64 (0.340) 2 NO CONNECT 13 NO CONNECT 3 CE1 14 BL 4.06 4 CE2 15 NO CONNECT (0.160) 5 CLR 16 D0 6 V 17 D1 DD 0.51 2.54 7 A0 18 D2 TYP. TYP. (0.020) (0.100) 8 A1 19 D3 9 WR 20 D4 Notes: 10 CU 21 D5 1. Unless otherwise specifi ed, the tolerance on all dimensions is 0.254 mm (0.010). 11 CUE 22 D6 2. All dimensions are in millimeters (inches). Absolute Maximum Ratings 1 Supply Voltage, V to Ground -0.5 V to 7.0 V DD Input Voltage, Any Pin to Ground -0.5 V to V + 0.5 V DD Free Air Operating Temperature Range, T -40C to +85C A Storage Temperature, T -40C to +85C S CMOS IC Junction Temperature, T (IC) +150C J Relative Humidity (non-condensing) at 65C 85% Soldering Temperature 1.59 mm (0.063 in.) Below Body Solder Dipping 260C for 5 secs Wave Soldering 250C for 3 secs ESD Protection, R = 1.5 k, C = 100 pF V = 1 kV (each pin) Z Note: 1. Maximum Voltage is with no LEDs illuminated. 2