HDSP-816E Broadcom

HDSP-815E/816E/815G/816G 20 mm (0.8 inch) General Purpose Seven Segment Displays Data Sheet Description Features These 20 mm (0.8 inch) displays use industry standard size Industry standard size and pin-out. The devices are available as either common Industry standard pin-out anode or common cathode. Available in either red or 15.24 mm (0.6 in.) DIP leads on 2.54 mm (0.1 in.) centers green colors, these gray-faced displays are suitable for Choice of colors indoor use. Red, Green No color binning is off ered for these parts. Mitered font These parts are subjected to Outgoing Quality Assurance Mitered corners on segments (OQA) inspection with AQL of 0.065% for functional and Gray face paint visual/cosmetic rejects. Gray package gives optimum contrast 50 Viewing angle Design fl exibility Common anode or common cathode Devices Categorized for luminous intensity HER HDSP- Green HDSP- Description Applications 815E 815G Common Anode Right Hand Decimal Suitable for indoor use 816E 816G Common Cathode Not recommended for industrial applications, i.e., Right Hand Decimal operating temperature requirements exceeding 85 C 1 or below -25 C 2 Extreme temperature cycling not recommended Notes: 1. For industrial applications, it is recommended to use HDSP-3901/ 3903/8601/8603. 2. For details, please contact your local Avago Technologies sales offi ce or an authorized distributor.Part Numbering System 5082 X XX X X X X XX HDSP X XX X X X X XX 1 Mechanical Options 00 : No Mechanical Option 1,2 Color Bin Options 0 : No Color Bin Limitation 1,2 Maximum Intensity Bins 0 : No Maximum Intensity Bin Limitation 1,2 Minimum Intensity Bins 0 : No Minimum Intensity Bin Limitation 1 Device Configuration/Color E : High Efficiency Red G : Green 1 Device Specific Configuration Refer to Respective Datasheet 1 Package Refer to Respective Datasheet Notes: 1. For codes not listed in the fi gure above, please refer to the respective datasheet or contact your nearest Avago representative for details. 2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically restricted to 1 bin per tube (exceptions may apply). Please refer to respective datasheet for specifi c bin limit information. 2