HEDG-9000 Series Codewheel for use with Avago Technologies Ultra-precision 17-Bit Absolute Single Turn Encoder Encoder Modules AEAT-9000 series Data Sheet Description Features Avago Technologies offers a codewheel designed specifi - Codewheel in Glass. cally for use with the AEAT-9000 series encoder modules. Cost Effective The HEDG-9000 Series codewheel is suitable for many Resolutions of 2048 CPR environments, applications, and budgets. Made from glass the HEDG-9000 codewheel has a resolution of 2048 For Use with AEAT-9000 Series Encoders CPR and an optical radius of 17.5 mm. Lead Free Note: Avago Technologies encoders are not recommend- Applications ed for use in safety critical applications, e.g., ABS braking systems, power steering, life support systems and critical Typical applications include care medical equipment. Avagos products and software Rotary applications up to 17 bits/360 absolute position are not specifically designed, manufactured or autho - Integration into servo motors rized for sale as parts, components or assemblies for the planning, construction, maintenance or direct operation Industrial and maritime valve control of a nuclear facility or for use in medical devices or High precision test and measurement machines applications. Customer is solely responsible, and waives Industrial and factory automation equipments all rights to make claims against Avago or its suppliers, for all loss, damage, expense or liability in connection with Textile, woodworking & packaging machineries such use. Please contact sales representative if more clari- Nacelle & blades control in wind turbine fication is needed. Absolute Maximum Ratings Parameter Symbol Min. Typical Max. Units Storage Temperature T -40 115 C S Operating Temperature T -40 115 C A Velocity 15000 RPM Shaft Axial Play -0.05 0.05 mm Shaft Eccentricity( inclusive module radial play) 0.05 mm TIR Recommended Operating Conditions Description Min. Typical Max. Units Maximum Count Frequency 500 kHz Shaft Axial Play -0.05 0.05 mm Shaft Eccentricity( inclusive module radial play) 0.05 mm TIRCodewheel installation instructions 1. Place codewheel on shaft 2. Set codewheel height using Set Height Tool a) Place the set height tool on the Module mounting surface, where the 2 guide pins being inserted into the 2 mounting holes b) Push the codewheel toward the set height tool until touching the tool. The codewheel is now at the proper height c) Tighten both codewheel set screws. 3. Remove the set height tool 4. Install encoder module. Figure 1a. Mount the CW with hub to shaft Figure 1b. Place the set height tool Figure 1c. Push the CW until touching the set height tool Figure 1d. Tighten the set screws 2