HLMP-0103 Broadcom

Product Overview HLMP-0103 T-1-3/4 (5 mm) Panel Mount Clip and Retaining Ring Description Mounting Instructions 1. Drill a 6.45/6.63 (0.254/0.261 in.) diameter hole in the The Broadcom HLMP-0103 is a black plastic mounting clip panel. Deburr but do not chamfer the edges of the hole. and retaining ring. It is designed to panel mount Broadcom high-profile T-1-3/4 size lamps. This clip and ring 2. Press the panel clip into the hole from the front of the combination is intended for installation in instrument panels panel. from 1.52 mm (0.060 in.) to 2.67 mm (0.105 in.) thick. For 3. Press the LED into the clip from the back. Use blunt long panels greater than 2.67 mm (0.105 in.), counterboring may nose pliers to push on the LED. Do not use force on the be needed to the required thickness. LED leads. A tool, such as a nut driver, may be used to press on the clip. 4. Slip a plastic retaining ring onto the back of the clip and press tight using tools such as two nut drivers. See the following figure. Broadcom 5989-0046EN January 24, 2018HLMP-0103 Product Overview T-1-3/4 (5 mm) Panel Mount Clip and Retaining Ring Package Dimensions 0.2900.010 7.370.25 0.2200.010 5.590.25 +0.005-0.010 0.025 0.375 TYP. 4X 9.53 +0.13-0.25 0.64 0.265 0.238 0.065 6.73 0.080 6.05 1.65 2.03 0.0050.003 0.110 0.130.08 +0.010- 2.79 0.265 +0.25- 0.0380.003 0.180 6.73 TYP. 4X 4.57 0.970.08 0.240 0.1510.005 o 6.10 3.840.13 120 TYP. 6X 0.0220.001 TYP. 6X 0.200+0.0040 0.560.03 5.08+0.100 NOTE: 0.2500.005 ALL DIMENSIONS ARE IN INCHES 6.350.13 (MILLIMETERS). 0.318 8.08 Broadcom 5989-0046EN 2