HLMP-1600, HLMP-1601, HLMP-1620, HLMP-1621 HLMP-1640, HLMP-1641, HLMP-3600, HLMP-3601 HLMP-3650, HLMP-3651, HLMP-3680, HLMP-3681 3 T1 / (5 mm), T1 (3 mm), 5 Volt, 12 Volt, 4 Integrated Resistor LED Lamps Data Sheet Description Features The 5 volt and 12 volt series lamps contain an integral Integral current limiting resistor curr ent limiting resistor in series with the LED. This allows TTL compatible the lamp to be driven from a 5 volt/12 volt source without Requires no external current Limiter with 5 volt/12 volt an external current limiter. The red LEDs are made from supply GaAsP on a GaAs substrate. The High Efficiency Red and Cost effective Yellow devices use GaAsP on a GaP substrate. Saves space and resistor cost The green devices use GaP on a GaP substrate. The diffused Wide viewing angle lamps provide a wide off-axis viewing angle. Available in all colors 3 The T-1 / lamps are provided with sturdy leads suitable 4 Red, High Efficiency Red, Yellow, and High Performance 3 for wire wrap applications. The T-1 / lamps may be front 4 Green in T-1 and T-13/4 packages panel mounted by using the HLMP-0103 clip and ring. Package Dimensions 1.14 (.045) 5.08 (0.200) 2.79 (.110) 4.57 (0.180) 0.51 (.020) 24.1(.95) MIN. 2.29 (.090) 1.52 (.060) 3.43 (.135) 0.65 (0.026) max. 1.02 (.040) 2.92 (.115) 9.19 (0.362) 8.43 (0.332) 0.89 (0.035) 12.34 (0.486) 0.64 (0.025) 3.17 (.125) 11.54 (0.454) 2.67 (.105) (0.022) 0.55 SQ. TYP. (0.016) 0.40 4.70 (.185) 4.19 (.165) 1.32 (0.052) 6.35 (.250) 1.02 (0.040) 5.58 (.220) 23.0 MIN. Figure A. T-1 package. (0.90) 0.46 (0.018) Notes: SQUARE NOMINAL 1. All dimensions are in mm (inches). 2. An epoxy meniscus may extend about 1 mm (0.040 ) down the leads. 3. For PCB hole recommendations, see the Precautions section. 1.27 (0.050) NOM. 6.1 (0.240) 5.6 (0.220) CATHODE 2.54 (0.100) NOM. 3 Figure B. T-1 / package. 4Selection Guide Luminous Intensity Iv (mcd) Package Operating Part Number 1 Color Package Description Outline 2q Voltage (V) HLMP- Min. Max. 1/2 Red T-1 Tinted Diffused A 60 5 1600 2.1 - 1600-D00xx 2.1 - 60 12 1601 2.1 - 1601-D00xx 2.1 - 1601-GH0xx 8.6 27.6 T-1 3/4 Tinted Diffused B 60 5 3600 2.1 - 3600-D00xx 2.1 - 60 12 3601 2.1 - 3601-D00xx 2.1 - Yellow T-1 Tinted Diffused A 60 5 1620 2.2 - 1620-C00xx 2.2 - 1620-C0Bxx 2.2 - 1620-EFBxx 3.4 10.8 60 12 1621 2.2 - 1621-C00xx 2.2 - T-1 3/4 Tinted Diffused B 60 5 3650 2.2 - 3650-C00xx 2.2 - 60 12 3651 2.2 - 3651-C00xx 2.2 - Green T-1 Tinted Diffused A 60 5 1640 1.6 - 1640-B00xx 1.6 - 1640-B0Dxx 1.6 - 1640-DE0xx 4.2 13.4 60 12 1641 1.6 - 1641-B00xx 1.6 T-1 3/4 Tinted Diffused B 60 5 3680 1.6 - 3680-B00xx 1.6 - 60 12 3681 1.6 - 3681-B00xx 1.6 - Note: 1. q is the off-axis angle at which the luminous intensity is 1/2 the axial luminous intensity. 1/2 2