HLMP-3301, HLMP-3401, HLMP-3507, HLMP-3762, HLMP-3862, HLMP-3962, HLMP-D401 3 T-1 / (5 mm) Diffused LED Lamps 4 Data Sheet Description Features 3 This family of T-1 / tinted, diffused LED lamps is High intensity 4 widely used in general purpose indicator applica tions. Choice of 4 bright colors Diffus ants, tints, and optical design are balanced to yield High Efficiency Red superior light output and wide viewing angles. Several Orange intensity choices are available in each color for increased Yellow design flexibility. High Performance Green 3 Popular T-1 / diameter package 4 Selection Guide Selected minimum intensities Luminous Intensity Material/ Iv (mcd) at 10 mA Wide viewing angle Color Part Number Min. Max. General purpose leads HLMP-3301 5.4 Reliable and rugged HLMP-3301-D00xx 2.1 Available on tape and reel GaP HER HLMP-3301-F00xx 5.4 HLMP-3301-FG0xx 5.4 17.2 HLMP-3762 8.6 HLMP-3762-G00xx 8.6 HLMP-3401 5.7 GaP Yellow HLMP-3401-E00xx 5.7 HLMP-3401-EF0xx 5.7 18.4 HLMP-3862 9.2 GaP Orange HLMP-D401 5.4 HLMP-D401-EF0xx 3.4 10.8 HLMP-3507 4.2 HLMP-3507-D00xx 4.2 GaP Green HLMP-3507-EF0xx 6.7 21.2 HLMP-3962 10.6 HLMP-3962-F00xx 10.6 Part Numbering System HLMP - x x xx - x x x xx Mechanical Option 00: Bulk 01: Tape & Reel, Crimped Leads 02: Tape & Reel, Straight Leads B1: Right Angle Housing, Uneven Leads B2: Right Angle Housing, Even Leads DD: Ammo Pack R4: Tape & Reel, Counter Clockwise Color Bin Options 0: Full Color Bin Distribution B: Color Bins 2 & 3 only Maximum Iv Bin Options 0: Open (no max. limit) Others: Please refer to the Iv Bin Table Minimum Iv Bin Options Please refer to the Iv Bin Table Brightness Level 0x: Less Brightness 62: Higher Brightness Color Options 3,7: GaP HER 4,8: GaP Yellow (except D4xx) 5,9: GaP Green Package Options 3: T-1 3/4 (5 mm) D: T-1 3/4 (5 mm) GaP Orange Package Dimensions 0.89 (0.035) 6.10 (0.240) 0.64 (0.025) SQUARE TYP. 5.59 (0.220) 0.55 (0.022) 0.40 (0.016) 0.65 (0.026) max 5.08 (0.200) 4.57 (0.180) CATHODE LEAD 9.19 (0.362) 1.27(0.050) 2.54 (0.100) NOM. 8.43 (0.332) 25.40(1.00) NOM. MINIMUM Notes: 1. All dimensions are in mm (inches). 2. An epoxy meniscus may extend about 1 mm (0.040 ) down the leads. 3. For PCB hole recommendations, see the Precautions section. 2