HLMP-331x, HLMP-341x, HLMP-351x Series 3 T-1 / (5 mm) High Intensity LED Lamps 4 Data Sheet Description Features 3 This family of T-1 / nondiffused LED lamps is High intensity 4 specially designed for applications requiring higher Choice of 3 bright colors on-axis intensity than is achievable with a standard - High Efficiency Red lamp. The light generated is focused to a narrow beam to achieve this effect. - Yellow - High Performance Green Selection Guide 3 Popular T-1 / diameter package 4 Luminous Intensity Iv (mcd) 10 mA Selected minimum intensities Color Part Number Min. Max. Narrow viewing angle Red HLMP-3316 24.8 - General purpose leads HLMP-3316-I00xx 24.8 - Reliable and rugged Yellow HLMP-3416 16.6 - Available on tape and reel Green HLMP-3519 12.0 - HLMP-3519-F00xx 12.0 -Part Numbering System HLMP - 3 x 1 x - x x x xx Mechanical Options 00: Bulk 01: Tape & Reel, Crimped Leads 02: Tape & Reel, Straight Leads B1: Right Angle Housing, Uneven Leads B2: Right Angle Housing, Even Leads Color Bin Options 0: Full Color Bin Distribution Maximum Iv Bin Options 0: Open (no max. limit) Others: Please refer to the Iv Bin Table Minimum Iv Bin Options Please refer to the Iv Bin Table Brightness Level 6, 9: Higher Brightness Color Options 3: GaP HER 4: GaP Yellow 5: GaP Green Package Dimensions 5.08 (0.200) 4.57 (0.180) 9.19 (0.362) 8.43 (0.332) 0.65 MAX. 0.89 (0.035) (0.026) 0.64 (0.025) 25.40 MIN. (1.00) CATHODE LEAD (NOTE 1) 0.46 (0.018) SQUARE 1.27 (0.050) NOM. NOM. 6.10 (0.240) 5.59 (0.220) Notes: 1. All dimensions are in millimeters (inches). 2. An epoxy meniscus may extend about 1 mm (0.40 ) down the leads. 2.54 (0.100) NOM. 3. For PCB hole recommendations, see the Precautions section. 2