HLMP-DB25-B0000 Broadcom

HLMP-DB25, HLMP-KB45 T-1 (5 mm), T-1 (3 mm) Blue LED Lamps Data Sheet Description Features These blue LEDs are designed in industry standard T-1 and Popular T-1 and T-1 diameter packages T-1 package with clear and non diffused optics. They are General purpose leads also available in tape and reel, and ammo-pack option for Reliable and rugged ease of handling and use. Available on tape and reel These blue lamps are ideal for use as indicators and for Binned for color and intensity general purpose lighting. Blue lamps offer color differen - tiation as blue is attractive and not widely available. Applications Status indicators Small message panel Running and decorative lights for commercial use Package Dimensions HLMP-KB45 HLMP-DB25 3.18 (0.125) 5.08 (0.200) 2.67 (0.105) 4.57 (0.180) 3.43 (0.135) 2.92 (0.115) 9.19 (0.352) 8.43 (0.332) 4.70 (0.185) 6.35 (0.250) 4.19 (0.165) 5.58 (0.220) 1.02 (0.040) NOM. 0.89 (0.035) 0.64 (0.025) 23.0 23.0 MIN. MIN. (0.90) (0.90) 0.45 (0.018) SQUARE NOMINAL 0.45 (0.018) SQUARE NOM. CATHODE 1.27 (0.050) 2.54 (0.100) NOM. 1.27 (0.050) NOM. NOM. 6.10 (0.240) 5.59 (0.220) CATHODE NOTES: 1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES). 2.54 (0.100) 2. EPOXY MENISCUS MAY EXTEND ABOUT 1 mm (0.040 ) DOWN THE LEADS. NOM. CAUTION: Devices are Class 1C HBM ESD sensitive per JEDEC Standard. Please observe appropriate pre- cautions during handling and processing. Refer to Application Note AN-1142 for additional details.Selection Guide Luminous Intensity Iv (mcd) Part Number Package Viewing Angle Min. Max. HLMP-KB45-A0000 T-1 40 30 HLMP-DB25-B0000 T-1 25 40 Part Numbering System HLMP - x x xx - x x x xx Mechanical Option 00: Bulk Color Bin Options 0: Full Color Bin Distribution Maximum Iv Bin Options 0: Open (no max. limit) Minimum Iv Bin Options Please refer to the Iv Bin Table Viewing Angle 25: 25 degrees 45: 40 degrees Color Options B: Blue Package Options D: T-1 (5 mm) K: T-1 (3 mm) Absolute Maximum Ratings at T = 25C A Parameter Blue Units Peak Forward Current 70 mA 1 DC Current 30 mA Reverse Voltage Not recommended for reverse bias 2 Transient Forward Current (10 sec Pulse) 350 mA LED Junction Temperature 115 C Operating Temperature 20 to +80 C Storage Temperature 30 to +100 C Wave Soldering Temperature 1.59 mm (0.063 in.) from Body 250C for 3 seconds Solder Dipping Temperature 1.59 mm (0.063 in.) from Body 260C for 5 seconds Notes: 1. Derate linearly from 50C as shown in Figure 6. 2. The transient peak current is the maximum non-recurring peak current that can be applied to the device without damaging the LED die and wirebond. It is not recommended that this device be operated at peak currents above the Absolute Maximum Peak Forward Current. 2