HLMP-LG75, HLMP-LM75, HLMP-LB75 Red, Green and Blue 4 mm Standard Oval LEDs Data Sheet Description Features These Precision Optical Performance Oval LEDs are spe- Well defined spatial radiation pattern cifically designed for billboard sign application. The oval High brightness material shaped radiation pattern with optimal viewing angle Available in red, green and blue color and enhance high luminous intensity ensure that these Red AlInGaP 626 nm devices are excellent for this outdoor applications. The package epoxy contains UV inhibitor to reduce the Green InGaN 530 nm effects of long term exposure to direct sunlight. Blue InGaN 470 nm Superior resistance to moisture Applications Standoff Package Billboard Sign Tinted and diffused Full Color Signs Typical viewing angle 40 x 100 Package Dimensions 21.0 7.26 0.20 MIN. 1.0 0.827 MIN. 0.286 0.008 0.039 3.00 0.20 1.25 0.20 0.118 0.008 0.049 0.008 CATHODE LEAD 3.80 0.20 2.54 0.30 0.100 0.012 0.1496 0.008 10.00 0.50 0.50 0.10 NOTE: 0.394 0.020 Sq Typ. 1. MEASURED AT BASE OF LENS. 0.80 0.020 0.004 MAX. EPOXY MENISCUS 0.031 Notes: All dimensions in millimeters (inches). Tolerance is 0.20 mm unless other specified Caution: InGaN devices are Class 1C HBM ESD sensitive per JEDEC Standard. Please observe appropriate precautions during handling and processing. Refer to Application Note AN-1142 for additional details.Device Selection Guide Luminous Intensity Iv (mcd) 1,2,5 at 20 mA Color and Dominant Part Number Wavelength (nm) Typ Min Max Typical Viewing Angle () d HLMP-LG75-XY0DD Red 626 1660 2400 40x100 HLMP-LM75-34CDD Green 530 4200 6050 40x100 HLMP-LB75-VWBDD Blue 470 1150 1660 40x100 Notes: 1. The luminous intensity is measured on the mechanical axis of the lamp package and it is tested with pulsing condition. 2. The optical axis is closely aligned with the package mechanical axis. 3. Dominant wavelength, , is derived from the CIE Chromaticity Diagram and represents the color of the lamp. d 4. is the off-axis angle where the luminous intensity is half the on-axis intensity. 5. Tolerance for each bin limit is 15%. Part Numbering System HLMP L x 75 x x x xx Packaging Option DD: Ammopack Color Bin Selection 0 : Full Distribution B : Color Bin 2 and 3 C : Color Bin 3 and 4 Maximum Intensity Bin Refer to Device Selection Guide Minimum Intensity Bin Refer to Device Selection Guide Color G : Red M : Green B : Blue Package L: 4 mm Standard Oval Note: Please refer to AB 5337 for complete information about part numbering system 2