HLMP-NM31-R0000 Broadcom

HLMP-NS31 and HLMP-NM31 T- (3mm) InGaN LED Lamps Data Sheet Description Features These InGaN lamps are designed in industry standard General purpose LED package with clear and non-diffused optics. These lamps Reliable and rugged are ideal for use as indicator and for general purpose Binned for color and intensity lighting. Bright InGaN dice Package Dimensions Applications 4.40 0.30 Status indicator 3.10 0.20 Small message panel Running and decorative lights for commercial use 3.50 0.30 Back lighting 5.85 0.50 2.00 Consumer audio 0.65 MAX. 23.0 MIN. + 0.10 0.45 - 0.04 1.0 MIN. 2.54 0.30 0.44 0.20 CATHODE 3.40 0.20 MARKS + 0.10 0.40 - 0 NOTES: 1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES). 2. EPOXY MENISCUS MAY EXTEND ABOUT 1 mm (0.040) DOWN THE LEADS. Cuation: Devi Ces are Class 1 es D sensitive. Please observe a PPro Prtie a Pre Cuations During han Dling an D Pro Cessing. r efer to a PPli Ctiaon n toe an -1142 for a DDitional Daeitls Selection Guide Luminous Intensity, Iv (mcd) at 20 mA Color and Dominant Viewing Angle, Part Number Wavelength d (nm) Typ. Min. Typ. 2 (degree) Tinting Type HLMP-NS3 -J00xx Blue 470 40 600 30 Un-tinted non-diffused HLMP-NM3 -R00xx Green 5 9 500 800 Notes: 1. The luminous intensity is measured on the mechanical axis of the lamp package 2. The tolerance for intensity limit is 15% 3. The optical axis is closely aligned with the package mechanical axis 4. The dominant wavelength, ld, is derived from the Chromaticity Diagram and represents the color of the lamp. Absolute Maximum Ratings, T =25C A Parameter Blue /Green Unit DC Forward Current 30 mA Peak Forward Current 00 mA Reverse Voltage (I = 0A) 5 V R LED Junction Temperature 5 C Operating Temperature Range -40 to +85 C Storage Temperature Range -40 to +85 C Notes: 1. Derate linearly as shown in Figure 5 Electrical/Optical Characteristics Parameter Symbol Min. Typ. Max. Units Test Condition Forward Voltage V 3.0 3.3 4.0 V I = 0 mA F F Reverse Voltage V 5 V I = 0 A R R Dominant wavelength NS3 460 470 480 nm I = 0 mA d F NM3 50 59 540 Peak wavelength NS3 464 nm Peak of wavelength of spectral peak NM3 5 9 distribution at I = 0 mA F Thermal Resistance R 90 C/W J-PIN Notes: 1. The dominant wavelength d is derived from the Chromaticity Diagram and represents the color of the lamp. 2. Tolerance for each color bin limit is 0.5 nm