HLMP-Y801-JPPxx T-1 (3 mm) AlInGaP LED Lamps Datasheet Description This family of T-1 lamps is widely used in general purpose Popular T-1 diameter package indicator and back lighting applications. The optical design is Reliable and rugged balanced to yield superior light output and wide viewing angles. Several intensity choices are available in each color for RoHS compliant increased design flexibility. Features Applications High luminous intensity output Status indicator Low power consumption Backlighting front panels High efficiency Light pipe sources Versatile mounting on PCB or panel Lighted switches I.C. Compatible/low current requirement Package Dimension Notes: 1. All dimensions are in millimeter (inches). 2. Tolerance is 0.25mm (.010) unless otherwise stated. 3. Lead spacing is measured where the leads emerge from the package. Revision 1-Feb 10, 2009 Selection Guide Color Part Number Package Description Luminous Intensity, Iv (mcd) 20 mA Viewing angle, 2() Min. Typ. Max. Green HLMP-Y801-JPPxx Untinted, Non-diffused 240 310 1150 30 Part Numbering System HLMP Y x x x - x x x xx Mechanical Options 00: Bulk 01: Tape & Reel, Crimped Leads 02: Tape & Reel, Straight Leads DD: Ammo Pack Color Bin Options 0: Full Color Bin Distribution Maximum IV Bin Options 0: Open (no max. limit) Others: Please refer to the IV Bin Table Minimum IV Bin Options Please refer to the IV Bin Table Absolute Maximum Ratings at T = 25C A Parameter HLMP-Y801-JPPxx Units DC Forward Current 20 mA Peak Forward Current 60 mA (1/10 Duty Cycle, 0.1ms Pulse Width) 5 V Reverse Voltage (I = 100A) R Junction Temperature 110 C Power Dissipation 48 mW Storage Temperature Range -40 to +100 C Operating Temperature Range -40 to +100 C Solder Temperature 260C 5 sec Revision 1-Feb 10, 2009