HSMC-C680 Broadcom

HSMx-C680 Right Angle Surface Mount ChipLEDs Data Sheet Description Features The HSMx-C680 series of chip-type LEDs are designed to Right Angle Mounting illuminate at a right angle to the direction of mounting. Compatible with IR Reflow Soldering Process When mounted on a PC board, these devices will emit Available in a Wide Variety of Colors light in a direction parallel to the board. Available in 8 mm Tape on 178mm (7) Diameter Reels The small 3.0 x 1.0 x 2.0mm footprint of the HSMx-C680 is designed for applications where space is limited. These Applications devices are available in four colors and use untinted, non- LCD backlighting diffused optics. Keypad Side/Backlighting The HSMx-C680 series of parts are compatible with IR Light Piping reflow soldering process only. Right Angle Indicator Package Dimensions 3.0 Device Selection Guide 1.0 Part Number Parts per Reel Color HSMA-C680 3000 AlInGaP Amber 0.3 0.3 HSMC-C680 3000 AlInGaP Red HSMG-C680 3000 GaP Green 2.0 HSMH-C680 3000 AS AlGaAs Red HSML-C680 3000 AlInGaP Orange HSMS-C680 3000 GaP High Efficiency Red, HER 2.0 1.0 HSMY-C680 3000 GaP Yellow 0.25 0.25 0.88 CATHODE ANODE (ANODE FOR (CATHODE FOR HSMH-C680) HSMH-C680) R 0.45 POLARITY MARK TO REINFORCE SOLDERING (NON-PIN CONNECTION) CATHODE ANODE CAUTION: HSMx-C680 LEDs are Class 1A ESD sensitive per JESD22-A114C.01 standard. Please observe appro- priate precautions during handling and processing. Refer to Application Note AN-1142 for additional details.Absolute Maximum Ratings at T = 25 C A Parameter AlInGaP GaP AS AlGaAs Units DC Forward Current 30 25 25 mA Power Dissipation 72 65 65 mW Reverse Voltage (I = 100mA) 5 5 5 V R LED Junction Temperature 95 95 95 C Operating Temperature Range -40 to 85C Storage Temperature Range -40 to 85 C Soldering Temperature See reflow soldering profile (Figure 6 & 7) Electrical Characteristics at T = 25C A Forward Voltage Reverse Breakdown 1 V (Volts) V (Volts) Thermal Resistance F R I = 20mA I = 100mA Rq (C/W) F R J-P Part Number Typ. Max. Typ. Typ. AlInGaP Amber 2.0 2.4 5 500 AlInGaP Red 2.0 2.4 5 500 GaP Green 2.2 2.6 5 300 AS AlGaAs Red 1.8 2.6 5 300 AlInGaP Orange 2.0 2.4 5 500 GaP HER 2.0 2.6 5 300 GaP Yellow 2.1 2.6 5 300 Notes: 1. VF tolerance : 0.1V Optical Characteristics at T = 25C A Luminous Intensity Color, Dominant Color, Viewing Angle 1 I (mcd) V 3 Wavelength Peak Wavelength 2q 1/2 20mA 2 ld (nm) lPeak (nm) (Degrees) Part Number Min. Typ. Typical Typical Typical AlInGaP Amber 28.5 76.9 591 594 115 AlInGaP Red 28.5 62.3 630 643 115 GaP Green 4.5 13.3 573 568 125 AS AlGaAs Red 7.2 30.7 642 657 125 AlInGaP Orange 28.5 108.6 604 611 115 GaP HER 2.8 5.1 621 636 125 GaP Yellow 2.8 9.3 589 588 125 Notes: 1. The luminous intensity IV is measured at the peak of the spatial radiation pattern which may not be aligned with the mechanical axis of the LED package. 2. The dominant wavelength, ld, is derived from the CIE Chromaticity Diagram and represents the perceived color of the device. 3. q is the off-axis angle where the luminous intensity is the peak intensity. 1/2 2