Data Sheet
HSMx-A4xx-xxxxx
SMT LED Surface-Mount LED Indicator
Description Features
The Broadcom Power PLCC-4 is an extension of our Industry standard PLCC-4
PLCC2 SMT LEDs. The package can be driven at higher
High reliability LED package
current due to its superior package design. The product is
High brightness using AlInGaP and InGaN dice
able to dissipate heat more efficiently compared to the
technologies
conventional PLCC-2 SMT LEDs. In proportion to the
High optical efficiency
increase in driving current, this family of LEDs is able to
Higher ambient temperature at the same current
produce higher light output compared to the conventional
possible compared to PLCC-2
PLCC-2 SMT LEDs.
Available in full selection of colors
Super wide viewing angle at 120
These SMT LEDs have higher reliability and better
Available in 8-mm carrier tape on 7-inch reel
performance and are designed to work under a wide range
Compatible with both IR and TTW soldering process
of environmental conditions. This higher reliability makes
JEDEC MSL 2a
them suitable for use under harsh environment and
High reliability LED package due to enhanced silicone
conditions like automotive. In addition, they are also suitable
resin material for InGaN family
to be used in electronic signs and signals.
Applications
To facilitate easy pick and place assembly, the LEDs are
packed in EIA-compliant tape and reel. Every reel will be
Interior automotive
shipped in single intensity and color bin (except for red
Instrument panel backlighting
color), to provide close uniformity.
Central console backlighting
These LEDs are compatible with IR solder reflow process.
Cabin backlighting
Due to the high reliability feature of these products, they
Navigation and audio system
also can be mounted using through-the-wave soldering
Dome lighting
process.
Push button backlighting
Exterior automotive
There are a variety of colors and various viewing angles
Turn signals
(30, 60, and 120) available in these SMT LEDs. Ideally,
CHMSL
the 30 parts are suitable for light piping where focused
intensities are required. As for the 60 and 120, they are Rear combination lamp
most suitable for automotive interior and exterior lighting
Puddle light
and electronic signs applications.
Electronic signs and signals
Interior full color sign
Variable message sign
Broadcom AV02-0479EN
July 11, 2018HSMx-A4xx-xxxxx Data Sheet SMT LED Surface-Mount LED Indicator
Office automation, home appliances, industrial equipment
Front panel backlighting
Push button backlighting
Display backlighting
Figure 1: Package Dimensions
SOURCE 1
SOURCE 2
2.8 0.2 1.9 0.2
2.2 0.2
0.1 TYP. 0.8 0.1
AC AC
3.2 0.2 3.5 0.2
0.8 0.3
CC CC
0.5 0.1
0.7 0.1
CATHODE MARKING
CATHODE MARKING
NOTE: All dimensions in millimeters. Electrical connection between all cathodes is recommended.
Device Selection Guide
a
Min. I (mcd) Max. I (mcd)
Color Part Number V V Test Current (mA) Dice Technology
Red HSMC-A400-S30M1 180.00 355.00 50 AlInGaP
HSMC-A401-U80M1 560.00 1400.00 50 AlInGaP
Red Orange HSMJ-A401-T40M1 285.00 715.00 50 AlInGaP
HSMJ-A401-U40M1 450.00 1125.00 50 AlInGaP
Orange HSML-A401-U40M1 450.00 1125.00 50 AlInGaP
Amber HSMA-A401-U45M1 450.00 1125.00 50 AlInGaP
Emerald Green HSME-A401-P4PM1 45.00 112.50 50 AlInGaP
Blue HSMN-A400-S8QM2 224.00 560.00 30 InGaN
HSMN-A400-S8PM2 224.00 560.00 30 InGaN
HSMN-A400-S4QM2 180.00 450.00 30 InGaN
Green HSMM-A400-W8QM2 1400.00 3550.00 30 InGaN
HSMM-A400-W8YM2 1400.00 3550.00 30 InGaN
a. The luminous intensity I , is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern may not
V
be aligned with this axis. I tolerance = 12%.
V
Broadcom AV02-0479EN
2