SP000063871 Broadcom

SFH757 and SFH757V Transmitter for Polymer Optical Fiber Applications Data Sheet Description Features The SFH757 is a low-cost transmitter diode for optical High speed transmitter for up to 100MBd applications data transmission with polymer optical fiber. Its InGaAlP (with peaking circuits) LED chip provides enhanced resistance to humidity and 2.2mm aperture holds standard 980/1000/2200m is designed to emit light at 650 nm. The robust SFH757 plastic fibers can be used for speeds up to 100 MBd and complements No fiber stripping required the Avago SFH250 photodiode receiver and SFH551/1-1 integrated photo detector receiver. Molded microlens for efficient coupling The SFH series is optimized for easy coupling. No fiber stripping is required just insert the cut fiber into the Plastic Direct Fiber Connector housing selected SFH component. (V-housing) Locking screw attached to the connector SFH757 Interference-free transmission by the light-tight The transparent plastic package has an aperture where a housing 2.2 mm fiber end can be inserted. This very easy coupling method is extremely cost-effective. Transmitter and receiver can be positioned flexibly No cross talk SFH757V Auto insertable and wave solderable The V-housing allows easy coupling of unconnectorized Supplied in tubes 2.2 mm polymer optical fiber with an axial locking screw. Ordering Information Applications Household electronics Power electronics Optical networks Light barriers Application Literature SFH757 SFH757V AN Description 5342 General information about the SFH series Type Ordering Code with Selection Guide and recommendations SFH757 SP000063871 regarding System Planning and Mounting SFH757V SP000063858 5341 Information about Basic and Special Circuits for Transmitter and Receiver of the SFH seriesPackage Dimensions SFH757 8.6 view from A surface not at 0.5 7.65 A 1.5 4.6 28 5.3 Cathode Dimensions in mm SFH757V 24.0 13.5 9.0 Cathode SFH757 component 0.6 locking screw 2.54 0.5 7.62 5.08 spacing Dimensions in mm Package V-housing Color Package V-housing axial locking screw SFH V-series components are color coded just like other Components of the SFH V-series are equipped with an Avago fiber optic components. The SFH757V transmitter axial locking screw for easy coupling to the unconnec- has a white colored housing the SFH250V and SFH551/1- torized 2.2 mm polymer optical fiber. The force that is 1V receiver components have a black colored housing. necessary to pull a jammed fiber out of the V-housing is This prevents mistakes while making connections. typically 50 N (with a torque of 15 cNm for tightening the Product designation and date of manufacture are printed locking screw). This is an approximate value that is very on the housing. dependent on the fiber and torque combination. Package V-housing mounting pins SFH V-series components have two pins that are electri- cally isolated from the inner circuit. The pins are only designed for mounting the V-housing to the PCB surface. This helps increase stability, which is needed during fixing the fiber end by the axial locking screw. The retention force between the soldered mounting pins Package V-housing mounting pins Package V-housing axial locking screw and the V-housing of the SFH component is about 20 N (with a vertical exertion of force). This is an approximate value. 2 3.5 0.5 0.6 4.625 2.275 4.8 8.8 2.54