BB300 BusBoard Prototype

BB300 , BB400 , BB400T Plug-in Solderless BreadBoards 300 and 400 tie point solderless plug-in breadboards provide a quick way to build and test circuits for experimentation or when learning electronics. Completed projects can be moved to the SB300 and SB400/SB404 Solderable PC BreadBoards to make them permanent. BB300 Plug-in BreadBoard SB300 Solderable PC BreadBoard Move your project to SB300 BB300 300 tie point Solderless BreadBoard SB300 300 tie point white ABS plastic with black legend Solderable PC BreadBoard 1 IC-Circuit Area, 300 tie-points Size: 3.3 x 1.4 x 0.3in (84 x 35.5 x 8.5mm) BB400 Plug-in BreadBoard SB400 Solderable PC BreadBoard Move your project to SB400 or SB404 Note: The SB404 adds 4 mounting holes BB400T Transparent Plug-in BreadBoard The BB400T transparent breadboard is great for beginners because they can see the internal circuit connections. BB400 and BB400T 400 tie point BreadBoard, SB400 400 tie point with two power rails Solderable PC BreadBoard ABS plastic with color legend, white or transparent 1 IC-Circuit Area (300 tie-points) plus 2 Distribution strips (100 tie-points) Size: 3.3 x 2.1 x 0.3in (84 x 54.3 x 8.5mm) BusBoard Prototype Systems - Built for designers www.BusBoard.com sales busboard.com BPS-DAT-(BB300+BB400)-0001 Rev 5 Datasheet.doc Page 1 2014 BusBoard Prototype Systems Ltd. BB300, BB400 and BB400T are trademarks of BPS. All rights reserved.Solderless Plug-in BreadBoards Solderless BreadBoard Specifications BB300 Body Material: White ABS Plastic with Black Printed Legend BB400/BB830/BB1660 Body Material: White ABS Plastic with Color Printed Legend BB400T/BB830T/BB1660T Body Material: Transparent ABS Plastic with Color Printed Legend Hole Pitch/Style: 0.1 (2.54 mm), Square Wire Holes ABS Heat Distortion Temperature: 84 C. (183 F.) Spring Clip Contact: Phosphor Bronze with Plated Nickel Finish Contact Life: 50,000 insertions Rating: 36 Volts, 2 Amps Insertion Wire Size: 21 to 26 AWG wire, or 0.025 Square post headers 0.016 to 0.028 inches diameter (0.4 to 0.7mm diameter) Backing: Peelable adhesive tape for attaching to a surface. Metal back plate provided with 830 tie point breadboards. Metal Back Plate Thickness: 0.031 inches (0.8mm) All BPS BreadBoards are Lead-Free and RoHS Compliant. Internal Connections BB400 BreadBoard BB300 BreadBoard The BB300 breadboard tie-points are connected in The BB400 and BB400T breadboards have 60 60 vertical columns (the green lines) with 5 vertical columns in the circuit area (the green lines) connected holes in each. This is the circuit area. plus 4 rails or distribution strips for power and When an integrated circuit is plugged into the ground running horizontally (the red and blue breadboard, each I.C. pin has a column. lines). There are no horizontal running connections on the A distribution strip can be used to carry a signal if BB300. it is not needed for power or ground. BusBoard Prototype Systems - Built for designers www.BusBoard.com sales busboard.com BPS-DAT-(BB300+BB400)-0001 Rev 5 Datasheet.doc Page 2 2014 BusBoard Prototype Systems Ltd. BB300, BB400 and BB400T are trademarks of BPS. All rights reserved.